Doggydog33

I think the hood is different if you have an FIA bar as opposed to the standard ‘roll hoop’. I couldn’t get my hood to fit after fitting a trackday cage. I had to buy another hood and sell mine on. As you’re tall, you may do well to buy the hood with the ‘easy in’ zip in the top. Can remember if it’s soft bits for sevens or Oxted who make them. as with most Caterham hoods, they will probably spend most of the time in the boot, especially if you get the half hood. Much easier to use! I don’t think the tonneau is designed to work with doors I think it’s one or the other. someone more knowledgeable will be along shortly to tell you for definite. Regards, Doggydog.

The Trackday roll cage. 👍🏻

To be fair to the parts guys, I think these are quite a new edition to their stock lists. dd33

They’re wrong. Spoke to Oxted and they said they couldn’t sell me any as they were under contact from Caterham. The Caterham parts guy needed some convincing when I phoned them, but he did find them. stock code:300V0125A Kind Regards, dd33

You can buy shorter ones from Caterham for an s3 with a full cage. I trimmed mine down but it didn’t end well. I ended up buying the short ones. Regards, Doggydog.

As David said, speak to Chris at Redline first. If Chris can’t get them, I’d phone Caterham parts department. I needed a wiper indicator/light before Christmas, the website showed no stock, but after chatting to the guy in the parts department he managed to magic one up. regards, Doggydog.

Brian James Minnow Max Trailer. Phenolic Ply centre decking with integral flush storage locker. Adjustable positioning wheel chocks. Front storage locker. Triple lock hitch. Locking spare wheel with new cover. Drawer pull out type ramps. Comes with a set of 4 ratchet tie down straps and locking wheel clamp/bar. Bed size 1705 Wx 3335 L Overall size 2100 W x 4600 L Used to transport a Caterham / Westfield. Full disclosure, it’s a friends trailer that he thought would be of interest to Caterham owners due to size. £2995.

Thanks Ian. Regards, Doggydog.

Hi wrightpayne, Did you manage to measure the harness spacers? Regards, Doggydog.

Hi Wrightpayne, Yep, I’m not in a rush Thank you. Regards, Doggydog.

Afternoon, Does anybody have the dimensions of the aluminium (?) spacers that are needed to fit the crotch belts to the brackets on an S3 with lowered floors? https://caterhamparts.co.uk/fittings/3799-crutch-strap-bush-lowered-floor-s3-sv-metric.html Regards, Doggydog.

Again, as per the aero screen post, I'll take them if you're happy to hold them for a few weeks until I can get over. regards doggydog.

I'll take it if you're happy to hang on to it for a couple of weeks until I can get over? obviously, I would pay you up front regards, doggydog

There are 3 relays under the dash, bolted through the bulkhead on the drivers side. Make sure you've got power to those. Also, oddly, the engine ecu has some control as to when the seats receive power (above a certain RPM I think). I think the ecu switches the earth to the relays. Have they stopped working or never worked? Regards, doggydog .

I think it's a 20 amp fuse for the heated seats on my car (620). Mine was in the fuse box underneath the dash. I believe earlier cars had in-line fuses in various places under the dash!