john g Posted March 13 Share Posted March 13 1995 xflow, 4 speed gearbox. Gearbox inspection top cover - is there a gasket in place between the cover and gearbox housing? Link to comment Share on other sites More sharing options...
OldAndrewE Posted March 13 Share Posted March 13 Yes Top lid gasket: 2000E Bullet gearbox (burtonpower.com) Link to comment Share on other sites More sharing options...
john g Posted March 13 Author Share Posted March 13 Andrew, not the same as that, but thanks. I’ve just contacted RedLine and hopefully the correct one is in the post. See the photo - the ‘round bobble’ in the picture, baffle underneath it, is this located at the front of the box, near the engine, or at the back, near the gear lever? Spoiler Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted March 13 Member Share Posted March 13 Which four speed 'box do you have? Jonathan Link to comment Share on other sites More sharing options...
john g Posted March 13 Author Share Posted March 13 I assume it’s the Escort Sport box Link to comment Share on other sites More sharing options...
john g Posted March 13 Author Share Posted March 13 Re Andrew’s Burton reference, it looks like this is the one. Link to comment Share on other sites More sharing options...
OldAndrewE Posted March 13 Share Posted March 13 Found this image online so it looks as if the answer to your question is it goes to the rear of the box Link to comment Share on other sites More sharing options...
john g Posted March 13 Author Share Posted March 13 Spot on, thanks Andrew. Link to comment Share on other sites More sharing options...
Gridgway Posted March 13 Share Posted March 13 IIRC It only fits one way in that the raised lateral bit in the middle is needed to give clearance when you move the gear lever from the 1-2 plane to the 3-4 plane Link to comment Share on other sites More sharing options...
john g Posted March 13 Author Share Posted March 13 Thanks for everyone’s inputs. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now