Lizzybus Posted January 26 Share Posted January 26 I have a 7 with a Zetec engine . Foolishly ( i think) I removed the TPS of the throttle bodies when we took the head off . I need to reset the TPS .So , can i do it by feel ( slacken off cable , set to just tick over , then tighten back up ) or is it a case of using a laptop . If so , where on earth can i get the software ? I dont think its supported .All help appreciated Thanks Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted January 26 Member Share Posted January 26 Is that the same as a "Mini Zeta"? Previous discussions: Jonathan Link to comment Share on other sites More sharing options...
Lizzybus Posted January 26 Author Share Posted January 26 Thanks , have messaged GEMS and Raceline . Link to comment Share on other sites More sharing options...
Lizzybus Posted April 22 Author Share Posted April 22 (edited) SORTED . Stephen Greenald of Race Engine Calibration did a complete re map (07774773824) Dyno at Marlin Motor Engineers Milton Keynes .( 01908366256) Didn't realise how bad the mapping was . So for those with ancient , papyrus scroll ecus Well worth it Edited April 22 by Lizzybus Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now