JP Posted July 23, 2023 Share Posted July 23, 2023 I'm about to fit my replacement cycle wings and I'm going to bolt them on. The assembly guides refer to drilling the 2 "marked" bolt mounting holes. However, my replacement wings are not marked.I looked at my old battered wings and the holes are 60mm back from the leading edge. However I have just read this link on the other recent thread on cycle wing bonding which suggests that the cycle wing front mount should be 80mm back from the leading edge.I have the smaller 13/14" wings - can anyone help with the correct location for the mounting holes please? Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted July 23, 2023 Member Share Posted July 23, 2023 Remember clearance on full lock.Jonathan Link to comment Share on other sites More sharing options...
JP Posted July 23, 2023 Author Share Posted July 23, 2023 #2 - I have widetrack and so I'm not sure that's an issue. Or am I wrong about that? Link to comment Share on other sites More sharing options...
Area Representative paul richards Posted July 24, 2023 Area Representative Share Posted July 24, 2023 I know you are not building new, but for IVA the front tip of the wing must be at least in line with the front edge of the wheel (not the tyre). Link to comment Share on other sites More sharing options...
John Vine Posted July 24, 2023 Share Posted July 24, 2023 As Paul says, the IVA requirement is a good guide to location. This is from CC's IVA Checklist:JV Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now