Ralph Posted September 19, 2021 Author Share Posted September 19, 2021 John / JonathanHad to remove the tunnel cover so I had access from both the top and bottom of the gear box.Fitted a new 2 Pin Switch to gearbox and undid the loom in the tunnel next to the gear box.Used a multimeter to identify the wires and connected at follows.1.Cut green live wire (Original feed for the old reversing light) fitted bullet connector2.Cut original connector from Green Brown Wire fitted bullet connector3. As suggested by Jonathan I connected the green/brown to the green wire on the new loom.Thanks to all for helping me with this as I NOW HAVE A WORKING REVERSING LIGHT !Ralph Link to comment Share on other sites More sharing options...
John Vine Posted September 19, 2021 Share Posted September 19, 2021 Excellent news!JV Link to comment Share on other sites More sharing options...
Leadership Team SLR No.77 Posted September 19, 2021 Leadership Team Share Posted September 19, 2021 Well done Ralph, it sounds like you're making some good progress now.Stu. Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted September 19, 2021 Member Share Posted September 19, 2021 Thanks for the update. Well done.And I'd guess that this discussion will help someone else sometime.Jonathan Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now