A7 OOH Posted January 19, 2020 Share Posted January 19, 2020 I will be lowering my 7" headlights when my new brackets arrive.What connectors do I need to obtain- (2005 K series) in advance and am I correct in assuming the lamps are connected to the main loom by a 6 way econoseal unit.Is the connector fitted to the lamp wiring a Male or Female?Do I need to buy a new complete unit(M/F) or will buying new connector pins and seals suffice, and what colour seals will i need.I understand it can be a job fitting the new econoseal unit any advice appreciated Link to comment Share on other sites More sharing options...
andydavy Posted January 19, 2020 Share Posted January 19, 2020 me too. would be great to have some fitting instructions when the brackets arrive Link to comment Share on other sites More sharing options...
Barkalarr Posted January 20, 2020 Share Posted January 20, 2020 You don't need anything new, you can just I unpick the current plug with a small screwdriver and reuse that. Don't cut any wires, just unpick them. Link to comment Share on other sites More sharing options...
A7 OOH Posted January 20, 2020 Author Share Posted January 20, 2020 Sounds goodGordon Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now