Andrew Willcox Posted April 4, 2018 Share Posted April 4, 2018 Hi,Just fitting a race-technology DL1 to my Caterham EU3 K Series.Can anyone advise me on how best to get an RPM input, not sure if I need to connect to rev counter inputs or if there is another way to get the input from the ECU.Thanks! Link to comment Share on other sites More sharing options...
Area Representative Richard Price Posted April 4, 2018 Area Representative Share Posted April 4, 2018 I use a DL1 on an EU3 car. I've connected to the tacho output from the ECU to the tacho. It's a long time ago, but I think I spliced in behind the tacho. Link to comment Share on other sites More sharing options...
Area Representative Richard Price Posted April 4, 2018 Area Representative Share Posted April 4, 2018 There are two pulse per rev, so you'll need set that in the default vehicle options. Link to comment Share on other sites More sharing options...
Andrew Willcox Posted April 5, 2018 Author Share Posted April 5, 2018 Thanks Richard,From studying the wiring diagram, it looks like 3 wires run to/from the tachometer from engine plug... 1 is an Earth, does it matter which of the other 2 I tap into?OK, think I’ve got it... the White and Black wire is the tacho output from the ECU according to the wiring diagram for the engine I’ve just found. Must be that one. So much info on this site if you keep looking!Out of interest, what other inputs have you connected? I see I have a brake flag and throttle position sensor installed. Link to comment Share on other sites More sharing options...
CharlesElliott Posted April 5, 2018 Share Posted April 5, 2018 White with black trace is the wire. As well as the one to the tacho itself, there is usually a spare one in the loom as well which is not connected to anything by default. Link to comment Share on other sites More sharing options...
Andrew Willcox Posted April 5, 2018 Author Share Posted April 5, 2018 Sorted thanks, found the spare connector, all working now. Link to comment Share on other sites More sharing options...
Area Representative Richard Price Posted April 5, 2018 Area Representative Share Posted April 5, 2018 Out of interest, what other inputs have you connected? I've got, rpm, throttle position, steering angle, brake pressure, oil pressure, and all four wheel speeds. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now