Andy Lef Posted June 15, 2017 Share Posted June 15, 2017 Anyone on POBC seen one of these for indicators? It might help me to remember to switch off the indicators rather than buzzers, which I'm too deaf to hearing anyway. Andy Link to comment Share on other sites More sharing options...
Roadru77er Posted June 15, 2017 Share Posted June 15, 2017 Only problem is that's on/off you need on/off/on Link to comment Share on other sites More sharing options...
Wrightpayne Posted June 15, 2017 Share Posted June 15, 2017 I'm about to fit side repeaters in the headlights so i spot when I've left them on.Ian Link to comment Share on other sites More sharing options...
Roadru77er Posted June 15, 2017 Share Posted June 15, 2017 Ah yes Wrightpayne I've been thinking of that too! Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted June 16, 2017 Member Share Posted June 16, 2017 There are lots of options to remind us or to self-cancel.Is what you are looking for a typical indicator switch with a built-in bright light?Jonathan Link to comment Share on other sites More sharing options...
Andy Lef Posted June 16, 2017 Author Share Posted June 16, 2017 Jonathan,Yes exactly that. Also going to put repeaters in the headlight bowl but fancied a lit toggle. Andy Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted June 16, 2017 Member Share Posted June 16, 2017 Preferences for appearance? How about: Jonathan Link to comment Share on other sites More sharing options...
Andy Lef Posted June 16, 2017 Author Share Posted June 16, 2017 Thanks Jonathan saw that one and considered it - though did have my heart set on a metal one wi the light in the tip as seem in the more simple on / off ones. I have done a lot of internet trawling but to date no success. Was hoping that the mre experienced members of BC would have beaten me to it. Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted June 16, 2017 Member Share Posted June 16, 2017 Have you looked at all the ones from CBS?Jonathan Link to comment Share on other sites More sharing options...
Area Representative gileshudson Posted June 16, 2017 Area Representative Share Posted June 16, 2017 Would this do sir... third down on the page... R13-404-DL http://www.bentex.com.hk/catalog/switches/car/images/r13-toggle-switch/r13-404.jpg Link to comment Share on other sites More sharing options...
DRH Posted June 16, 2017 Share Posted June 16, 2017 Hi chaps Do they need to be 20A, with 3 connectors Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted June 16, 2017 Member Share Posted June 16, 2017 The fuse rating is typically 10 A.At least 3 connectors: the ignition switched feed and the L and R outputs.Jonathan Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now