Monte Busa Posted January 5, 2015 Share Posted January 5, 2015 I am startng to work on piecing back together the wiring on my racer, as it was pretty buggered up when I bought the car. To give me a clean foundation, I purchased a "race" Rover loom (for Stack instruments) from CC, but they couldn't give me a schematic for that particular loom.Also, the connector that joins the chassis harness to the engine harness has an entirely different connector, and CC could not source me a new engine loom (EU2).Does anyone have schamtics for either the EU2 engine loom on the Rover race chassis loom?Cheers, Aric Link to comment Share on other sites More sharing options...
John Vine Posted January 7, 2015 Share Posted January 7, 2015 Can't help with the wiring diagrams, I'm afraid, but there's some info here re EU2/EU3 converters that might be of some help.Edited to add: There's also a possible source mentioned here. (Is the PH Shaun_E the same as our BC Shaun_E?)JV Link to comment Share on other sites More sharing options...
Monte Busa Posted January 9, 2015 Author Share Posted January 9, 2015 Thanks for the leads John. I'll check into both.Aric Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted January 9, 2015 Member Share Posted January 9, 2015 Do you have a guide to the common wirlng colours?Jonathan Link to comment Share on other sites More sharing options...
Monte Busa Posted January 10, 2015 Author Share Posted January 10, 2015 Good tip and reminder Jonathan - that will come in handy Im sure.Cheers, Aric Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now