finmac Posted October 5, 2014 Share Posted October 5, 2014 I am well underway with my old crossflow rebuild and the engine is all suiny and ready to go back into the car having been out for 7 years (but thats another story!). I didnt remove it myself and as such am now trying to work my way through the plumbing arrangements that it should have. I dont have all the old smaller diameter water hoses but do have a new set of Samco silicone hoses to use instead. I wondered if any one would be kind enough to email me over a few pictures if you have a similar set up please?car has dry sump with remote passenger footwell tank, Titan pump, plus an oil cooler. Running on twin 40 webers, Header tank is up near the bulkhead. Thanks in anticipation!email is:finlay_lisa at yahoo dot co dot uk Link to comment Share on other sites More sharing options...
finmac Posted October 5, 2014 Author Share Posted October 5, 2014 Mmm, first new sitepost which didnt seem to pop up till I replied to it! Link to comment Share on other sites More sharing options...
elie boone Posted October 5, 2014 Share Posted October 5, 2014 YHM Link to comment Share on other sites More sharing options...
MarcNS Posted October 7, 2014 Share Posted October 7, 2014 I had a few issues recently with mine, a front mounted dry sump pump will be very tight, if you have this; the engine mounts are also as pig to locate Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now