AndrewGP Posted December 1, 2013 Share Posted December 1, 2013 Chaps, any chance of seeing some engine bay pictures of the external (easiclean) tank installs for the K Series? I'm moving things about (battery, catch tank, ecu etc) and I'm after a few ideas that will satisfy my OCD tendencies for neat and tidiness! Many thanks. Link to comment Share on other sites More sharing options...
Jason Plato Posted December 1, 2013 Share Posted December 1, 2013 I dare say any engine type is the same for the easy clean 6.5" tank as it sits in place of the passenger footwell. Link to comment Share on other sites More sharing options...
AndrewGP Posted December 1, 2013 Author Share Posted December 1, 2013 Quite right Dave Link to comment Share on other sites More sharing options...
Wrightpayne Posted December 1, 2013 Share Posted December 1, 2013 GP, what particular shots do you need? Tank, pump, sump and bulkhead? Should be able to do tomorrow. Ian Link to comment Share on other sites More sharing options...
AndrewGP Posted December 1, 2013 Author Share Posted December 1, 2013 Ian, tank and bulkhead would be great. Obviously I've got your guide but I need to reposition the (new gel) battery, loom, catch tank and ecu and just wondered how others had done it. Link to comment Share on other sites More sharing options...
Mark w Posted December 1, 2013 Share Posted December 1, 2013 how about locating the gel battery under the passenger seat ? ( or the passenger footwell as per the 620R ) Link to comment Share on other sites More sharing options...
AndrewGP Posted December 1, 2013 Author Share Posted December 1, 2013 My plan is to mount the battery where the heater used to be on the bulkhead as the DS easiclean tank is going in the shortened passenger footwell. Link to comment Share on other sites More sharing options...
Jason Plato Posted December 2, 2013 Share Posted December 2, 2013 if you could send your mail address I can forward pics of my set up with battery and tank as you describe Link to comment Share on other sites More sharing options...
skydragon Posted December 2, 2013 Share Posted December 2, 2013 Here's a link to a photo of mine (see photo at bottom of web page) here Edited by - skydragon on 2 Dec 2013 10:53:06 Link to comment Share on other sites More sharing options...
Birkin S3 ZA. Posted December 2, 2013 Share Posted December 2, 2013 WOW Skydragon those are some mean looking hose clamps on the water pipes they wont come off in a hurry 😬 Link to comment Share on other sites More sharing options...
skydragon Posted December 2, 2013 Share Posted December 2, 2013 those are some mean looking hose clampsMikalor's finest 😬 😬 (Joking aside, i did try standard jubilee clips, but found I could never stop the joints weeping, with the silicone pipes) Link to comment Share on other sites More sharing options...
AndrewGP Posted December 2, 2013 Author Share Posted December 2, 2013 Thanks chaps and also to those who emailed me pictures, great stuff and really useful 😬 Link to comment Share on other sites More sharing options...
Wrightpayne Posted December 4, 2013 Share Posted December 4, 2013 More just sent. If there are any specific angles you're missing let me know. Ian Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now