Jump to content
Click here if you are having website access problems ×

Half Hood fitting


Chris C

Recommended Posts

There are some tabs that fit beneath the legs of the roll bar which then clip to straps on the half hood pulling up through the gap in the boot cover

If you check out the SBFS web site there used to be a picture/diagram on there - it really is incredibly simple to fit

Link to comment
Share on other sites

Just fitted my first half hood & drove with it on tonight for the first time.

I like it *thumbup* 🥰

Mine is silver or perhaps white & it felt like sitting in a noisy conservatory with the filtered light coming through the roof.

Link to comment
Share on other sites

In theory the straps will fit through/under the trailing legs of the roll bar and then clip to the 'tab' without the need for tools. However I needed to remove the bolts and refit to thread the strap through - not a big issue. I did find I had to purchase a longer set of Y-straps than were supplied. The trailing legs are attached much lower down in a live axle than the later de Dion (that Bruno (who else?) had when I bought the half hood off him). The longer Y-straps allow the Velcro on the ends of the straps to match up when the half hood is fitted and hence not flap.

 

Edited by - Clousta on 2 May 2012 06:06:54

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...