Alexander Gurr Posted March 11, 2012 Share Posted March 11, 2012 Hi Chaps, I am busy trying to get the Academy car race prepared and for the life of me can't find any instructions on how to do this....can anyone point me in the right direction, or tell me how? Many thanks, Alex Link to comment Share on other sites More sharing options...
chris perry 1 Posted March 11, 2012 Share Posted March 11, 2012 Hello, It bolts onto the chassis a frame bolt, front roll cage boss by the windscreen stantion and boss in front of the roll cage by the top of the damper. It should have been supplied with a fitting kit which has the necessary bolts. See here: http://www.caterham-build.co.uk/article/And+a+little+bit+more...+.html Have fun! Chris Perry Link to comment Share on other sites More sharing options...
CharlesElliott Posted March 11, 2012 Share Posted March 11, 2012 Of course, that's assuming the holes line up...... 😬 Link to comment Share on other sites More sharing options...
myothercarsa2cv Posted March 12, 2012 Share Posted March 12, 2012 Check my website here I forget to take photo's I'm afraid, but once you've summoned up the courage to drill your sideskin, it's quite straight forward. Link to comment Share on other sites More sharing options...
Alexander Gurr Posted March 12, 2012 Author Share Posted March 12, 2012 Thanks guys The main question when looking at it was to mount on top of the front cage mount, or underneath 🤔 I went for on top in the end and all seems well. Opening the door is now somewhat more of a challenge though 😬 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now