Krismuss Posted November 16, 2011 Share Posted November 16, 2011 Used carbon cycle wings for 13" wheels. Not sure of manufacture though it has been suggested they're from 'Carbon Bits' (I can't confirm this though - I will try and get hold of the previous owner). In excellent condition, no scrpaes, I just need to remove the sikaflex from the underside (from where I cut them off). I will also measure their width as I had an issue with clearance over AO48s though I think this was more with my 'shortened' wing stays rather than the arches themselves. I'm looking for £120 for the pair (inc postage) unless someone tells me that's not the going rate for used carbon. Pics below (if it works) Chris (price amended to £120 on Nigel's advice - for the time being 😬) Edited by - krismuss on 16 Nov 2011 17:46:01 Link to comment Share on other sites More sharing options...
Nigel R300 Posted November 16, 2011 Share Posted November 16, 2011 From the photos i would be asking for around £120 for the pair Nigel Link to comment Share on other sites More sharing options...
Krismuss Posted November 16, 2011 Author Share Posted November 16, 2011 Cheers Nigel! I'm happy to post and if they're not up to expectations would willingly negotiate down from £120. Chris Link to comment Share on other sites More sharing options...
Mad Hatter Posted November 16, 2011 Share Posted November 16, 2011 *arrowup*Sold to that man for £120 Link to comment Share on other sites More sharing options...
Krismuss Posted November 16, 2011 Author Share Posted November 16, 2011 Link to comment Share on other sites More sharing options...
zetec Posted November 16, 2011 Share Posted November 16, 2011 I fear you may have just bought some cycle wings!! 😬 😬 Link to comment Share on other sites More sharing options...
djg Posted November 16, 2011 Share Posted November 16, 2011 If these are still available I will happily take them. Regards Doug Link to comment Share on other sites More sharing options...
Krismuss Posted November 16, 2011 Author Share Posted November 16, 2011 Doug, Other than Nigel's advice above, yours is the only other post I can make sense of, so if you want them they're yours. As suggested above, I'll clean them & check them over again before posting. If when you get them you're not happy with them let me know. I'll also post up their width tonight. Thanks Chris Link to comment Share on other sites More sharing options...
djg Posted November 16, 2011 Share Posted November 16, 2011 Thanks Chris. YHBM Doug Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now