Mavic82 Posted November 21, 2010 Share Posted November 21, 2010 As the title suggests. Can anyone point me in the right direction please, ideally a web site that has photo's and dimensions. The few I have found have poor or no photo's and nothing but bore diameter. Thanks Guy Link to comment Share on other sites More sharing options...
Bricol Posted November 22, 2010 Share Posted November 22, 2010 McGill Motorsports - nice guy, quick delivery and decent quality stuff - no drawing, but dimensions listed. eg: here Bought a few items from him - M8 rose joints used on the front anti-roll bar on an integrale evo are under considerable load - OEM ones don't last long, but these must be 4 years old and fine. Bri Link to comment Share on other sites More sharing options...
simonpa Posted November 22, 2010 Share Posted November 22, 2010 Is this for track ends or shocks? CC do them for the Bilstein race shocks, if that's what you are after? Link to comment Share on other sites More sharing options...
ECR Posted November 22, 2010 Share Posted November 22, 2010 McGill for me as well ... Ex Chairman Roger Link to comment Share on other sites More sharing options...
EFA Posted November 22, 2010 Share Posted November 22, 2010 Redline have some spacers used on a S4 Lotus 7 which are 1/2" ID - I used these for the dampers on K2RUM. Full Terms and Conditions of this post can be read here. Link to comment Share on other sites More sharing options...
Mavic82 Posted November 22, 2010 Author Share Posted November 22, 2010 Thanks all for the advice. Will try McGill. Need a range of sizes for the front wishbone (fully rose jointed) Thanks Guy Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now