Kevsta Posted February 9, 2010 Share Posted February 9, 2010 Hi all, does anyone know where the best place is to get the proper roll cage padding? Also, does anyone know where to get a seal kit for the girling (96 era) standard MC? I went to a place yesterday and they are going to try to match the seals...I'm not holding my breath. Many thanks Kev Link to comment Share on other sites More sharing options...
John Ryan Posted February 9, 2010 Share Posted February 9, 2010 Try Redline for the seal kit. Link to comment Share on other sites More sharing options...
Badger Bill Posted February 9, 2010 Share Posted February 9, 2010 Demon Tweeks padding Rally design padding BB Link to comment Share on other sites More sharing options...
Kevsta Posted February 9, 2010 Author Share Posted February 9, 2010 Brill, many thanks... Link to comment Share on other sites More sharing options...
Kevsta Posted February 9, 2010 Author Share Posted February 9, 2010 Just to highlight that I will be going for the FIA stuff, safety first as all the upgrades in the world won't save my head in a collision! 😳 Apparently CC might be cheaper (from an e-mail I just received) Link to comment Share on other sites More sharing options...
Badger Bill Posted February 9, 2010 Share Posted February 9, 2010 I think you might be right, £19.98 (unknown length) from Caterham £24.99 for 915mm lengths from Demon Tweeks I agree with the safety first approach, and this way it doesn't stick out around the roll cage either, although I imagine that the same look could be fashioned with five mins and a Stanley knife. Link to comment Share on other sites More sharing options...
Manxseven Posted February 9, 2010 Share Posted February 9, 2010 Kev, I have a Master cylinder for sale. Little used. I think there is a picture on my link below Any good? Simon ----- Caterham BEC here Link to comment Share on other sites More sharing options...
Rich N Posted February 9, 2010 Share Posted February 9, 2010 Hi Kev, Raceparts aren't too far from you and they're my new favourite supplier. They supply Girling stuff. --=[Oxford7s.net]=-- [subscribe: List-subscribe@Oxford7s.net] Link to comment Share on other sites More sharing options...
Kevsta Posted February 9, 2010 Author Share Posted February 9, 2010 Ooh ooh options options. Simon, how much were you looking for (and did you rob the CC parts department?!)? Rich, they are not far, will wait on Simon and a call from the idiots I went to see yesterday (I have little confidence in them getting the parts right at all!). Let me know Simon Kev Link to comment Share on other sites More sharing options...
Manxseven Posted February 9, 2010 Share Posted February 9, 2010 Hi Kev, How does £25 including post to you sound? I'm off work tomorrow, so can post off 1st class to you if you want it, blatmail me your address if so. Cheers Simon ----- Caterham BEC here Edited by - Manxseven on 9 Feb 2010 15:36:14 Link to comment Share on other sites More sharing options...
Kevsta Posted February 9, 2010 Author Share Posted February 9, 2010 Done, BM on its way. Kev Link to comment Share on other sites More sharing options...
Manxseven Posted February 9, 2010 Share Posted February 9, 2010 Kev, I'll pick it up on home pc this eve, then wing my way to the Post Office tomorrow, Cheers, Simon Caterham BEC here Link to comment Share on other sites More sharing options...
jonboylaw Posted February 9, 2010 Share Posted February 9, 2010 Simon, are you including the bias valve for that ? If not, then put it in the big box.. :D J Jonathan My Flickr ----------------------------------- This rebuild has started :) 92 Supersprint, Ford LSD LA, RK AX Crossflow. Link to comment Share on other sites More sharing options...
Manxseven Posted February 9, 2010 Share Posted February 9, 2010 Hi Jon, Sorry already sold that, how about a nice new Caterham High effort Brake Pedal Simon Caterham BEC here Link to comment Share on other sites More sharing options...
jonboylaw Posted February 10, 2010 Share Posted February 10, 2010 No need, but thanks for the offer :) Get to that bubble wrapping! J Jonathan My Flickr ----------------------------------- This rebuild has started :) 92 Supersprint, Ford LSD LA, RK AX Crossflow. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now