Jump to content
Click here if you are having website access problems ×

CSR260 rear diff / diff case


DMorris

Recommended Posts

Dean that's tough luck 😔 did it break after the factory upgrade [steel spacers instead of ali] or hadn't that been done?

 

As far as the diff. casing goes, why not just ring around a few breakers yards and get one from an old Sierra, then send it off to a specialist to have your original CWP built into it?

Link to comment
Share on other sites

I'd only had the car 4 weeks, first track day at Oulton Park, 4th session and Snap!

 

No idea if it had had the modification - was there a recall on the older cars to have the modification carried out?

 

It is at caterham so am awaiting their report.

 

cheers

 

Dean

Link to comment
Share on other sites

  • 2 weeks later...

Yes, there was a recall, and a couple of other owners have had the same problem. They sent out a set of steel spacers, and I got the local agent [Millwoods] to fit them free. it's quite an arduous job to. Is your car an early one, say 2005/06? If so it would probably have needed to be done.

 

Paul J.

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...