wild bill Posted May 18, 2009 Share Posted May 18, 2009 This engine can currently be heard in all it's glory in the car but will be coming out in about 3-4 weeks ish as i am replacing with something Duratecy Rover Bellhousing £120 SOLD to Steve 4 into 1 exhaust system with Raceco 6.5 can (2 months old) inc primaries NOW £600will separate (Raceco can £400) Bernard Scouse Airbox £150 SOLD 1.8 K series engine built by Rob Walker complete with fuel rail and injectors set up by Dave at Emerald VHPD superlight head pushing out 190 bhp Piper 285 cams Jenvey DTH throttle bodies Vernier pulleys Lightweight flywheel and AP clutch, Apollo tank. Engine mounts. Alternator, Starter motor. Clutch and flywheel installed 1500 miles ago £2950 SOLD to Graham Open to reasonable offers on remaining bits (Exhaust and Bellhousing) Edited by - wild bill on 18 May 2009 17:27:15 Edited by - wild bill on 20 May 2009 14:19:17 Edited by - wild bill on 12 Jun 2009 14:31:53 Edited by - wild bill on 12 Jun 2009 15:34:00 Link to comment Share on other sites More sharing options...
Graham King Posted May 18, 2009 Share Posted May 18, 2009 WB, YHM. Graham. R7 GPK Superlight #85 Link to comment Share on other sites More sharing options...
Gulfb Posted May 18, 2009 Share Posted May 18, 2009 YHM - Air Box please! Link to comment Share on other sites More sharing options...
taffyracer Posted May 18, 2009 Share Posted May 18, 2009 2nd dibs on the airbox please Link to comment Share on other sites More sharing options...
BlackBart Posted May 18, 2009 Share Posted May 18, 2009 WB YHM Graham C9TRM Link to comment Share on other sites More sharing options...
Grubbster Posted May 18, 2009 Share Posted May 18, 2009 Ooh! Ooh! ! . . . . not this time then. Have a BTT anyway Link to comment Share on other sites More sharing options...
BlackBart Posted May 19, 2009 Share Posted May 19, 2009 WB Thanks for your mail - I think I'll pass this time - may spend the money on my engine BTTT Link to comment Share on other sites More sharing options...
wild bill Posted May 19, 2009 Author Share Posted May 19, 2009 Airbox sold to Andrew Link to comment Share on other sites More sharing options...
wild bill Posted May 20, 2009 Author Share Posted May 20, 2009 Bttt Link to comment Share on other sites More sharing options...
wild bill Posted June 10, 2009 Author Share Posted June 10, 2009 UPDATE Ok K series Bellhousing is still available as is the Raceco Exhaust I am commencing the knockdown this weekend so Exhaust will be off the car. It's complete with primaries and collector (though could be separated) as this way you'll know it fits. I am open to offers that are at least reasonable go on try me it's gotta go Link to comment Share on other sites More sharing options...
Jason Plato Posted June 10, 2009 Share Posted June 10, 2009 Bill I would keep the silencer and simply turn it 180 deg for the duratec here is my Duratec R .... C7 TOP Taffia joint AO with Al Link to comment Share on other sites More sharing options...
wild bill Posted June 10, 2009 Author Share Posted June 10, 2009 Dave That was the original intention however i discussed this with AMMO who gave me the impression that this would be problematic. Rob is currently building the engine and supplying the ancilliaries, did you turn yours Dave? I would of course prefer to keep it but my understanding was that this is not possible any advice appreciated Link to comment Share on other sites More sharing options...
Jason Plato Posted June 10, 2009 Share Posted June 10, 2009 yup I turned my silencer - its actually a R500 silencer - pics on link below . I suspect Ammo wants to sell you another silencer Whats the worst - you have to get the inlet realigned with your duratec primaries here is my Duratec R .... C7 TOP Taffia joint AO with Al Link to comment Share on other sites More sharing options...
wild bill Posted June 12, 2009 Author Share Posted June 12, 2009 Boing for updated prices and status Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now