dalongbloke Posted April 15, 2009 Share Posted April 15, 2009 Is the ital axle beather hole threaded? Just got a replacemrnt (nylon) breather which appears to have a thread in it??? Does anyone know what fitting could fit so I could make a breather tube? Ta.... Andy Link to comment Share on other sites More sharing options...
ChrisHawkins Posted April 15, 2009 Share Posted April 15, 2009 Hi Andy, I can have a look when I get home, I managed to fit a aeroquip fitting to mine and run it to a small catch tank, have a look here Chris K93 AMJ Link to comment Share on other sites More sharing options...
ChrisHawkins Posted April 15, 2009 Share Posted April 15, 2009 In fact looking at the link I listed the sizes Chris K93 AMJ Link to comment Share on other sites More sharing options...
Ralph Posted April 15, 2009 Share Posted April 15, 2009 Ital Axle shiuld have a thread. I replaced one not so long ago, the last owner changed the axle but broke the breather in the process. Link to comment Share on other sites More sharing options...
Ralph Posted April 15, 2009 Share Posted April 15, 2009 Ital Axle shiuld have a thread. I replaced one not so long ago, the last owner changed the axle but broke the breather in the process. Link to comment Share on other sites More sharing options...
Ralph Posted April 15, 2009 Share Posted April 15, 2009 Ital Axle shiuld have a thread. I replaced one not so long ago, the last owner changed the axle but broke the breather in the process. Link to comment Share on other sites More sharing options...
Ralph Posted April 15, 2009 Share Posted April 15, 2009 Ital Axle shiuld have a thread. I replaced one not so long ago, the last owner changed the axle but broke the breather in the process. Link to comment Share on other sites More sharing options...
Ralph Posted April 15, 2009 Share Posted April 15, 2009 Ital Axle shiuld have a thread. I replaced one not so long ago, the last owner changed the axle but broke the breather in the process. Link to comment Share on other sites More sharing options...
Revin Kevin Posted April 15, 2009 Share Posted April 15, 2009 Hi all, Whether you put a carch tank on the end or not just remember it must be able to vent to atmosphere or it could force oil past the seals. I've enlarge the threaded hole (not absolutely necessary) then have an open end pipe running up to the boot floor level and back down to the lower chassis tube, to allow it to breath but not have oil forced out on heavy corner loads. works fine for me. Cheers Chris Link to comment Share on other sites More sharing options...
john g Posted April 17, 2009 Share Posted April 17, 2009 Looking at the breather on my Ital axle is nothing like yours Chris. Best can be described as a piece of plastic tube about 4" long which seems to be fitted from inside the axle tube unlike the 'threaded' version you have. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now