tbhall777

Received my pads today. Noted P&P was £8.29 and not £3.50 (-£4.79). I will send you a little envelope, with a fiver in it. Thanks for all your efforts:- Terry.

Graeme Have you received my letter and cheque. If so I look forward to my little parcel arriving. Regards:- Terry.

Thanks Dude

I have sent you a cheque and mailed you as per our phone conversation on Thursday evening 29/8/02. E1163 - RS4-2 Caterham std rear £81.89 E1265 - RS4-2 AP upgrade front £104.23 Regards:- Terry Hall.

Graeme I have mailed you twice. Are you receiving my mails. Mail content as below. Regards:- Terry. ____________________________________________________________________________ Hello I would like the following provided they are for the new type AP 4 pots issued by Caterham Cars. I have a 98 spec SLR, which has the new type front 4 pots. E1163 - RS4-2 Caterham std rear £81.89 E1265 - RS4-2 AP upgrade front £104.23 Please let me know. Regards:- Terry Hall (Essex).

Cheers. I have mailed him.

I need RS4-2 compound for the new type AP 4p fronts and siera rears. Do they make them for these callipers dudes, if so Im in. Edited by - tbhall777 on 22 Aug 2002 22:36:03

RS4-2 pads will also work well (AS quoted by Peter C) Where is the best place to get these pads i.e. price wise. I have an SLR with the new type 4 pots and uprated master / big bore. I have to stand on the pedal to stop.

RS4-2 pads will also work well (PC) Where is the best place to get these pads i.e. price wise. I have an SLR with the new type 4 pots and uprated master / big bore. I have to stand on the pedal to stop.

Replace cam belt at 500 miles ??

Checked mine tonight, all are 8.8.

Your bell crank bolts should be high tensile. From memory either 8.8 or 10.9. Check on the bolt heads, as these are critical. I think you may be using bogo standard bolts. Do not drive the car until you have confirmed the bolt specs with Caterham Cars.

Should Caterham not perform a recall, or are they waiting for somebody to die. It will happen sooner or later. This component should not fail period.

You do not require an extractor for the fronts. They are tapper roller bearings.

titanium fasteners (6AL-4V). Titanium is 40%lighter than steel, yet is stronger than mild steel; it is more resistant to corrosion than stainless steel & has no adverse reactions when used with other metals. Edited by - tbhall777 on 6 Jun 2002 20:32:34