Jump to content
Click here if you are having website access problems ×

rdchalfont

Account Inactive
 View Profile  See their activity

  • Posts

    263

  • Joined

  • Last visited

 Content Type 

Everything posted by rdchalfont

  1. rdchalfont
    Look here - I edited this post before I'd posted it! *confused*
  2. rdchalfont
    one game only - not going to get hooked on this like those flippin' lasers... 😬 Score 130615 Level 15 Most rockets launched 5 Longest fuse 24 Coins 223 Gems 16 Rank Crowd Pleaser
  3. rdchalfont
    36 days since I left my last job 😬 😬 😬 Unknown number of days till I start a new job seeing as I haven't accepted an offer yet *confused* Number of lashes from the wife for not working - as if I'd tell you lot that... *tongue* Anyone need a management & technology consultant / project manager?
  4. rdchalfont
    Hope this hasn't been posted before... Click here to waste your friday driving an F1 car... ❗ ❗ ❗ What time can you get - and with which driver? 😬 😬
  5. rdchalfont
    Gave up - couldn't do 32. Right then, back to work...
  6. rdchalfont
    OK, am stuck at level 32. Can clear all but 2 at the side... *confused*
  7. rdchalfont
    Just finished level 25... got bored... leaving window open in case I want to come back to it later though...
  8. rdchalfont
    Much blood and guts later... 830.1
  9. rdchalfont
    I won't make it - although I'll only be a couple of hundred yards away at the Butcher’s Hook & Cleaver, located at 61-63 West Smithfield, EC1A 9DY, celebrating leaving my job earlier this month!! Anyone who fancies a pint before the curry - or is still up for more later, I'll be there from just before 6 until, well, late... Here's a map for the pub Oh, and can I please ask everyone in advance not to shout tomorrow... thanks!
  10. rdchalfont
    Apologies if this has been posted before, but I've been away from the 'sheds for a few days and haven't been keeping up with the chatter... Hit the Penguin 2 😬
  11. rdchalfont
    Thanks for the advice - didn't realise that car wheel valves unscrewed in a similar way to bicycle ones. Will have to give that a try. Unfortunately I think the valve is bad as its been leaking for quite a while - and has been blown up again many times. If it was grit in the valve, or just bad seating, then I would have expected after the number of times I've disturbed it to have got it clear or got a good seal by now. Its actually on my tin top - alloy wheels on a 306. I normally run them at 38psi - but the last time I inflated this wheel the pump started showing 4psi *eek* (Admittedly the car had been off the road for a few weeks because of broken power steering - see my thread in the test area!)
  12. rdchalfont
    My car has a bad valve on one of the wheels - bad meaning it has a slow leak, requiring the tyre to be pumped up regularly. The leak is through the valve itself, not around the seal between the valve and the wheel. I can tell this because of the air pressure under the valve cap! Does anyone know if it is possible to just replace the valve - or do they have to take the tyre off the wheel to get at the valve from the inside to do it?
  13. rdchalfont
    Probably me - I cut/pasted everyones IDs into my MSN yesterday morning because I was bored waiting for the wife to get ready to go to Church...
  14. rdchalfont
    Idea sounds like it has promise... I might be interested.
  15. rdchalfont
    (help! help! save me! i can't resist....) isn't a POLE some sort of vertical ERECTION?
  16. rdchalfont
    This thread does seem to have been SHAFTed by some poor attempts at innuendo, doesn't it?
  17. rdchalfont
    Mmmm, Merlot...
  18. rdchalfont
    Only asked because came across a similar problem on a BMW years ago that had the same symptoms I described before. Turned out to be a failing coil - after 2 garages including a BMW one gave the car a full bill of health! How they could do that when the car blatantly had a tendency to stall when you demanded torque was beyond me ❗
  19. rdchalfont
    Do the engine revs drop as well or is it just the needle? And do you have any secondary symptoms like occasional hesitation or even stalling when trying to pull away from stationary? Edited by - rdchalfont on 29 Jan 2004 12:38:30
  20. rdchalfont
    Wasn't able to make it last night as I had a prior commitment - but then again I haven't been to the London meet for almost 3 years. But don't worry - I have had many a good curry in that time! Anyway, seeing as the Raj is only a 10 minute walk away from the office maybe I'll pop in next month as my seven-withdrawal is getting worse by the week. Whats the day/date of the February meet as if I get it in my diary now there is a much greater chance that I make it?
  21. rdchalfont
    12175.5
  22. rdchalfont
    I want a refund! My penguin stopped after only 8270.8 *mad* Edited by - rdchalfont on 28 Jan 2004 13:33:08
  23. rdchalfont
    £320 later and my car has a new power steering ram. *mad* Does anyone else think £55 per hour labour is excessive or is that the going rate these days? *confused*
  24. rdchalfont
    Don't do it! Keep the car! I did it and have now been seven-less for almost two years! 😳 *mad* Mind you, call me a glutton for punishment if you will but I did get married as well so that hasn't helped my cause ❗ ❗ Maybe I should volunteer to be a passenger to go to Le Mans to get my fix - haven't done that since 1999!
  25. rdchalfont
    1210.8 after only trying about 5 times! Whats the limit on this one 🤔 🤔
×
×
  • Create New...