mike.williams1

not sure what the thread sizes are but they are the same as aeroquip size they are marked dyna-quip DH DHS.220BWP HOPE THIS HELPS

5 dry break connectors suitable for brake lines £100 the lot

THANKS FOR THAT PHIL

any ideas even choke size would be helpful

JUST REBUILT MY 2.0 ZETEC SPEC 11.2.1 COMPRESSION 132.95 CFM STD VALVE SIZE KENT CAMS FZ2002 WEBER ALPHA IGN 3D 45DCOES DOES ANYBODY HAVE A GOOD JET SPEC FOR THIS SETUP AND ANY IDEA OF CORRECT CHOKE SIZE TO USE THE CAR WILL BE USED MAINLY FOR HILLCLIMBS AND SOME ROAD USE THANKS

ANDY WHEN I FITTED ARP BIG END BOLTS I TORQUED THEM UP TO 32LB/FT THIS THE SETTINGS BURTONS GAVE ME WHEN I BOUGHT THEM AND HAVE NEVER HAD ANY PROBLEMS WITH THEM

has anybody got a spare 1 5/8" exhaust collector does not matter about outlet size as i can change that thanks

can you tell me what spec cams and head your using to get 220bhp thanks

someone had a westfield zetec manifold for sale on the westfield site www.wscc.co.uk

I HAVE JUST BOUGHT A PAIR OF DUNNELL CAMS ZVR101 DOES ANYBODY HAVE ANY IDEA WHAT POWEROUTPUT I SHOULD EXPECT FROM THESE. AS I BOUGHT THESE SECONDHAND DUNNELL IS RELUCTANT TO GIVE ANY INFO. AT PRESENT I AM USING KENT FZ2002 CAMS SHOULD I STICK WITH THESE AT PRESENT 195BHP AT FLYWHEEL