I just want to make sure that I connect the pipes up right way round after replacing my oil filter housing.
Looks like the top pipe goes into the mocal connection nearest the block?
Thanks Paul.
Titanium Silver with twin black stripes going West.
I was in the Yellow SV going East.
Presumably local as I am sure you have been past our house just South of Seend village.
Regards Paul.
Tom,
Please can I have the foglight lens, cracked mine the other day and Mot coming up so rather opportune!
Let me know payment details for the postage.
Regards Paul.
I have to say that I also preferred the separate sections. I don't know on which post it was shown as an example on here but the Westfield site makes it much easier to scroll between categories. I do appreciate the work that is put in by people with a much better grasp of modern technology than me.
Regards Paul.
Phew, no canister so worries over and one step nearer.
Thanks for your quick reply. Looking some way ahead, what engine build manual would you recommend using for my 1600 supersport K series?
Regards Paul.
We have just about everything in and connected but seem to have a spare electrical connector!!
The wiring for it comes out of the loom half way under the inlet manifold and can almost stretch to the front of it. Grey and Black oval two pin connector, yellow and red wire, brown and pink wire, any suggestions?
Many thanks Paul.
All the following from an SV which has just been sold.
Tonneau £30
SBFS leather tunnel bag £80
Half hood £140
Clear Meteor Motorsport aeroscreen £175
Brand new mirrors for above £75 SOLD
Pair of 7" black headlights £45
10 spoke 15" wheel with CR500 (as new) £125
Collect from Wilts or postage at cost, can probably deliver to L2B if needed.
Contact Philip 07949 006527.
Two CSR style carbon cycle wings, brand new and never fitted, diagonal weave £75. SOLD
After thinking that the easiest way forward was to swap engines instead of replacing the pistons (see heavy oil mist) the wiring on the VVC (out of my S3) is very different from the 1600 road sport engine that I am trying to replace. Both EU3, VVC has coil pack under the inlet manifold, the 1600 has them at the plugs. Do I need a different engine loom?
Many thanks, Paul.
Pity this wasn't a week ago Nick, Clive lives just down the road from me and I could have delivered, although I doubt postage will be much. Thanks for your help, regards Paul.
Compression test done
No 1 50
No 2 250, 120 second time
No 3 35
No 4 250, 110 second time
No's 1 and 3 remained fairly constant in subsequent tests.
Busy the rest of this week but hopefully can get some time next week to sort this out. Thanks for the help chaps.