Bert320

SOLD

BTTT

Logacre rear view mirror complete with clamps to suit roll cage, 14" or 17". Anyone got one hanging around that they've removed from a cage or given up racing and no longer need one? Thanks, Rob

BTTT

BTTT, surely this lovely spring weather will tempt someone?

link to PH advert Edited by - Bert320 on 13 Feb 2013 13:21:41

Sadly I'm selling my 2008 Roadsport Sigma 150 I built this car and it was first registered in June 2008 and I will be very, very sad to see it go but I'm moving on to different things. Viper blue with silver stripe and nose band (currently has a matt black vinyl stripe running centrally back from the nosecone badge which can be easily removed) Black pack Composite tillet seats 4 point harnesses Quick release Momo steering wheel Start button 12v accessory socket both sides under dash in bulkhead Heated & tinted windscreen Heater Map pockets both sides and on rear bulkhead between seats Floor mats Armrests on doors Full weather gear (hood & doors) High level brake light & Caterham loom extension Aero fuel filler 14” Minilight wheels in silver Yokohama A048 tyres Mintex 1144 front brake pads Sigma 150hp engine 5 speed gearbox MOT to June 2013 Currently on SORN 12800 miles Oil & filter changed at least twice a year Latest ECU map installed and set up at Caterham Midlands mid August 2012 Photos available, drop me an email if required. Ad going on PH as soon as I get round to it. Thanks for looking, Rob. £18500 for a quick sale.

As the title !

I have a BJ Minno Max and tie down my forward facing S3 with ratchet straps threaded behind the wheels and wheel protection straps across the front of wheels. The problem is that the rear straps rub the front of the rear arches. Has anyone got a simple solution to stop this happening? I’ve tried gaffer tape which leaves a mess and a piece of pipe insulation but these came out, any suggestions welcomed. Thanks, Rob

FIA Roll Bar – Metric Chassis Twin diagonal FIA approved (track day) roll bar to fit a metric chassis. Bought new in 2009 and fitted to a metric chassis. Caterham part No:30RB04AK, £294 new. £200 Plus postage etc Being brutally honest it has a small chip in the powdercoat on the rear of the top bar which must have happened in the garage since removing it - hence the reduction from £200 to £180 plus postage etc.

Hood bag Used mainly to store hood in garage, only fitted on car a handful of times so in good condition. Caterham part No:76250 @ £76.80 new £50 Plus postage etc Located near Belper in Derbyshire and can be collected if preferred. Can send photos and/or give more details if required.

BTTT

NOW SOLD

Now on Pistonheads here

Rear Anti Roll Bar – Metric Chassis Bought new in 2011 and fitted to a metric chassis – full kit. Caterham part No:RARB01K @ £144 new. £75 Plus postage etc or can be collected from near Belper in Derbyshire.

Six Speed Gearbox to suit a Sigma engine. Caterham six speed gearbox complete with gear lever and genuine Caterham aluminium engraved gear knob. I bought this gearbox last year from a well respected source within the Caterham community, Road & Race Transmissions checked over the internals and replaced the input shaft & nose plate to suit the Sigma engine. Installed last winter and it has since only done around 1500 miles. Gearbox Caterham Part No:36G004A, £3060 new. Gear lever, Caterham Part No:73449, £101.40 new Aluminium engraved gear knob, Caterham Part No:72923, £47.40 new. Total package over £3200 new. £1800 plus postage etc or can be collected from near Belper in Derbyshire.

Sadly I'm selling my 2008 Roadsport Sigma 150 ☹️ I built this car and it was first registered in June 2008 and I will be very, very sad to see it go but I'm moving on to different things. Viper blue with silver stripe and nose band (currently has a matt black vinyl stripe running centrally back from the nosecone badge which can be easily removed) Black pack Composite tillet seats 4 point harnesses Quick release Momo steering wheel Start button 12v accessory socket both sides under dash in bulkhead Heated & tinted windscreen Heater Map pockets both sides and on rear bulkhead between seats Floor mats Armrests on doors Full weather gear (hood & doors) High level brake light & Caterham loom extension Aero fuel filler 14” Minilight wheels in silver Yokohama A048 tyres Sigma 150hp engine 5 speed gearbox MOT to June 2013 Taxed to end of March 2013 12800 miles Oil & filter changed at least twice a year Latest ECU map installed and set up at Caterham Midlands mid August 2012 Photos available, drop me an email if required. Thanks for looking, Rob. £18500 for a quick sale. Edited by - Bert320 on 11 Oct 2012 20:07:40

Dave, YHM.

Heated windscreen required for an S3. Glass must be good enough to pass MOT. Frame less important, would prefer blackpacked but not critical. Cheers, Rob Edited by - Bert320 on 21 Sep 2012 13:54:18

Set of four 185/60R14 Medium compound Yokohama A048's with 2-2.5mm of tread. I removed these from my road wheels in spring 2011 and was going to use them for trackdays but plans change. Collection preferred from Belper in Derbyshire. Clearing room in the garage. Free or donation to NtL. Cheers, Rob. Edited by - Bert320 on 19 Sep 2012 21:46:19

Thanks for the responses, I will email photos this evening. Cheers, Rob

Pair of increased visability sidescreens required, ideally with mirrors. Must be in good condition. Cheers, Rob

Due to a change in direction of future Caterham ownership I have the following items available for sale. All parts are located near Belper in Derbyshire and can be collected if preferred. Can send photos and/or give more details if required. All are for an S3 chassis. Cheers, Rob. Six Speed Gearbox – Sigma Caterham six speed gearbox to suit a Sigma engine, complete with gear lever and genuine Caterham aluminium engraved gear knob. I bought this last year from a well respected source within the Caterham community, Road & Race Transmissions checked over the internals and replaced the input shaft & nose plate to suit the Sigma engine. Installed last winter and it has since only done around 1500 miles. Gearbox Caterham Part No:36G004A, £3060 new. Gear lever, Caterham Part No:73449, £101.40 new Aluminium engraved gear knob, Caterham Part No:72923, £47.40 new. Total package over £3200 new. £1800 plus postage etc FIA Roll Bar – Metric Chassis Twin diagonal FIA approved (track day) roll bar to fit a metric chassis. Bought new in 2009 and fitted to a metric chassis. Caterham part No:30RB04AK, £294 new. £200 Plus postage etc Rear Anti Roll Bar – Metric Chassis Bought new in 2011 and fitted to a metric chassis – full kit. Caterham part No:RARB01K @ £144 new. £75 Plus postage etc Hood bag Used mainly to store hood in garage, only fitted on car a handful of times so in good condition. Caterham part No:76250 @ £76.80 new £50 Plus postage etc Edited by - Bert320 on 18 Sep 2012 18:16:51 Edited by - Bert320 on 19 Sep 2012 12:39:43 Edited by - Bert320 on 24 Sep 2012 19:05:33

What's the best way to clean the shiny parts of tillet seats ? What can anyone recommend to remove marks & scuffs from seats etc?

I'd still like a pair if anyone wants to sell some !