Bert320

Ideally 140hp Supersport spec Standard cams, not VVCT What have you got ?

BTTT Anyone got a wing knocking about before I have to buy from Caterham? Cheers

Drivers side rear wing wanted for race car. Black preferred but not essential, condition not too critical as long as it's structurally sound. Thanks.

Hi Jonathan, I do have the instructions and the basic loom diagram, unfortunately my car doesn't have the prepared connector. Trying to save myself time and pain if someone already has the information - why reinvent the wheel :-)

Hi all, I have a set of the DRE shift lights to install on my 2013 Sigma engined car, has anyone already done this that could tell me the exact wires to connect to on the car? Ideally referencing the Caterham wiring diagram would be excellent. Thanks

Hi all, I have a set of the DRE shift lights to install on my 2013 Sigma engined car, has anyone already done this that could tell me the exact wires to connect to on the car? Ideally referencing the Caterham wiring diagram would be excellent. Thanks

Still wanted as I was too slow for the set Barkalarr offered :-(

Set of ACES or DRE shift lights wanted. Must be in good working order. What have you got? Thanks

Does anyone know the origin or part number for the Sigma 125/140 single throttle body. The cable has a mechanical adjuster at the throttle body end. Thanks

As title suggests, I'm looking for a "as new" catalytic converter for a Sigma engined car. Thanks.

Any idea who makes the steering racks for Caterham? I have a standard rack which I would like to make quick ratio and was wondering if I could get it done cheaper than buying new. Thanks

BTTT Any interest before these go on Ebay?

BTTT

S3 Metric Chassis Narrow Track Wishbones Pair of top wishbones (Pt No:30F003A & 30F004A) and a pair of bottom wishbones (Pt No:30F009A & 30F010A). Metric chassis removed from a 2013 car due to widetrack upgraded. Good condition. £200 plus P&P. Set of Four Bilstein Spring Damper Units Set of four (two front Pt No:75526A and two rear Pt No:75531A) standard Bilstein spring damper units without adjustable platforms. Removed from 2013 metric chassis S3 due to upgrade. Good Condition. £350 plus P&P. S3 Narrow Track Front Anti Roll Bars Orange, Red and Green available, all ready to bolt straight on with brackets, bushes, balls and dust covers. No longer required due to widetrack upgrade. £40 each plus P&P. Pair of 13/14” wing stays Handed pair of 13/14” wing stays (Pt Nos:76103 & 76104). No longer required due to upgrade. Need a bit of tidying where I’ve removed bonded on wings but otherwise good condition. £50 plus P&P. Sprint timing strut (Pt No:78910), only used for three sprints vgc. £10 plus P&P Parts located near Belper in Derbyshire.

BTTT*smile*

BTTT

Wanted - ideally widetrack, 8% quicker ratio steering rack to fit metric chassis. Could swap for a standard ratio narrow track rack.

Wanted - pair of half doors to fit an S3 metric chassis fitted with full cage and drivers side impact bar. I have a pair of standard half doors if anyone wants to swap?

BTTT

Set of four Avon CR322's 185/70R13. supplied with my 2013 Academy car and CATERHAM branded so ideal for this years Academy. 3off at approx 4mm of tread and 1off at approx 6mm of tread (had to replace one during season). £50 plus P&P Can deliver to Oulton Park 28/29-06-14 for first Academy race Edited by - Bert320 on 17 Jun 2014 20:47:42

Rollcentre T100 Lap Timer, same as this - http://www.rollcentre.com/laptimers Works very well and in good condition but battery cover broken so held closed with tape, appears to be a common problem with these but never a problem as battery lasts for ages. Instructions included. £30 plus P&P

Richard, YHM

As it says in the description, I'm looking for an S3 narrow track Green (18mm) front anti roll bar with or without brackets, balls etc. Thanks, Rob

Nosecone wanted for a metric S3, prefer black and good condition but will take any colour at right price. Thanks, Rob

BTTT Caterham description is: Cycle Wing Stay - Race Type Part Nos: 76101 & 76102