Jump to content
Click here if you are having website access problems ×

johnpbransfield

Member
  • Posts

    548
  • Joined

  • Last visited

Posts posted by johnpbransfield

  1. Hi SKC,

    I have the same system on my 2009 car. I was given this information when I needed to bleed mine but solved my problem by altering the pedal stop. The information I was given is as follows and, I am told a bit messy so plenty of paper towels!

    1) Slacken Union a little and pump fluid through (bell housing end)

    2)Final pump, pedal all the way down then tighten Union (2 people required)

    3) Make sure reservoir does not run out of fluid.

    This info was given to me by a racer who had the engine in and out regularly, though I have not tried it.

    Last year I had the 140 SS conversion done by Sevens and Classics which involved the engine out and new crb. I helped (sort of) during the conversion and made notes of the clutch bleed system which is as follows. 1) Fill reservoir (it had been drained)   2) Pump pedal - fill reservoir , keep repeating  3) Hold pedal down to floor, open bleed at reservoir  4) Fill reservoir  5) Repeat until bleed finished.

    This only took a few minutes and did not involve bleeding the slave cylinder, the car has done circa 6000 miles since with no issues.

    Hope one of these works for you, would be interested to know how you go on as I have not had to do it yet! The guy at S&C said it was not as fiddly as trying to use the bleed system on the newer cars. It certainly seemed simple when we did it but experience counts for a lot! Good luck.

  2. Due to change of plans I have the following for sale. 4 X Yokohama A539 tyres 185/60/R13   80H. Tread depth 2@6mm, 2@5mm. They have done two track days and six sprints. Looking for £80.00 plus carriage at cost. Can email pics if of interest.

    NOW SOLD!

     

     

     

  3. Yokohama A539 185/60/R13 80H X 4 tyres for sale. Due to change of plans I have the above for sale. They have done 2 Track days and 6 sprints. Tread depth 2@5mm, 2@6mm. Looking for £80.00 plus carriage at cost. Tyre of choice for Class 1 and 2.

    NOW SOLD,

  4. Advice please on my trailer tyres. Loads of tread left on them but the date of manufacture is August 2005. Would it be advisable to replace them before next season?

    Thanks in advance.

×
×
  • Create New...