Hurtle

Oily, I have a set of of Blue plastic injectors,(slim compaired to the ones in my car) numbers on the side are 0280 156 024. Think they are EU3. Any good to you? Jason

R500 CC Spotted on the A25 coming out of Dorking heading toward Guildford. Sunday at 2ish.

I have used this lot here A couple of times, Nice Carbon Kayak in the second hand section. Jas

Annoying thing is I did replace the CBR, Thats why I was thinking Spigot Bearing. However I recall the clips that hold the CRB onto the Fork looking a little dodgy, I wonder if it has come adrift.

I think I know the answer already but looking for a second opinion. Just replace the engine in my Car (k-series). With the engine running when I put my foot on the clutch I get a loud Whirring noise. Looks like I may have jiggered the Spigot bearing during install. does that sound right? or is it the CRB? Looks like its time to take the engine back out Thanks Jason.

I will get the Multimeter out and have another check, I was hoping there was a setting in the Emerald software I had missed. I was considering just rewiring the TPS. Whats the best way to remove the old pins from the ECU plug? Is there a special tool to do this? Jason.

Hi, Getting ready to start my new engine. First problem is that The Emerald is not seeing the Throttle position sensor. I am using the original 1400ss loom, I have tried a couple of different TPS's but both do not show any movement on the setup screen in the emerald Softwear, even when removed from the Jenveys and turned by hand. Any Ideas? Thanks Jason.

SWMBO really would start to worry if she caught me going to the garage armed with a Condom. Honestly its to catch oil dear. 😬

On the A283 Between Steyning and Washington. I was coming the other way in my tintop just as that Police car overtook you with its blue lights on. Did you think the blue lights were for you? 😬 Jas Edited to say Sunday at 12ish. Edited by - hurtle on 23 Mar 2009 14:44:11

Got it. They will be in the post this afternoon or tomorrow Morning at the latest. Jason

Hi, Blatmail me your address I have a couple knocking about. Jason.

Cheers Oily didnt want to disturb you with more questions. 😬 P.S: got the cams. Thanks.

Can anyone advise where to buy, and a make and model of Airflow meter to Balance Jenveys with please. Thanks Jason.

Anyone got a pair of Piper 285h Cams knocking around? Its a long shot I know, but trying here before a buy a pair. Or can anyone recommend a good stock source for these? DVA? Thanks Jason.

Hi, I have a standard rad off a 1400k knocking around the garage, It was fine when I took it off, I think it has collected a couple more dings since I took it off, but it looks like it will be ok. Its yours if you want it, I could take it to the Surrey meet tonight. Jason