dom69
-
Posts
346 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Blatmaps
Speed Championship Results
News
Website Help
Downloads
Gallery
Store
Everything posted by dom69
-
Hi, having just bought a new caterham filler cap and neck assembly to replace the rover one I thought 'this looks a piece of cake to fit'. First question is does the silver ally face plate come off the neck? I have tried but don't want to break it and question 2 is does the cork gasket go inside the boot, sealing the neck to the bodywork? Thanks in advance Dom
-
Pulled off towards Edenbridge, hope you had a great drive.
-
Just by the Wapses lodge roundabout out side the café
-
I spoke to the water board for oxted, westerham and surrounding area as I found the tap water has a very high reading of phosphate in it(not ideal for swimming pool water), they said this is put in the water to line the old lead pipe to reduce lead leaching into the water
-
thanks for the advice
-
How did the wires go through the carbon block? Don't have to cut that do I?
-
HI I want to swap the rubber blocks for carbon, is there a way of taking the wires out of the light holders or just cut and re-join by soldering? Also have the fog/reverse light blocks too, the lenses seem to 'rattle' around in them a bit, they are better secured in the original blocks, is this normal? Parts are from carbon mods if this helps thanks
-
YHM
-
hi emilys dad, where abouts are you based?
-
Mohair looks better
-
just text a friend who is into his s800s (has about 5 so far) will let you know if he's interested
-
I thought all the spare wheel racks were the same size
dom69 replied to Caterham Kid's topic in TechTalk
strange how it fitted the car at cc? maybe its an omen, buy a new caterham!!! -
no sealing bit on mine(bought last year), doors just tuck up under hood
-
*wavey*UPDATE After charging the battery for 24hrs still nothing, have now had new one fitted thanks to Richard (jj48), also got a cuppa out of him 😬. his diagnoses was very accurate, it was f*****. Thanks again for all help in this matter.
-
got it started so went for a quick 20 mile trip, i realise its not a great time to go(heater on, lights on) but when i got home and tried to restart, the starter just 'clicked' although now there's enough charge to put the immob on, have left charging again to see what happens. richard- got no mail yet
-
Ian- haven't checked levels as i thought it was a sealed unit Jonathon- halfords battery charger and conditioner I'm going to drag it out of the garage and see if i can jump start from swmbo car. Any ideas about replacments?
-
Been trying to charge the Banner battery on the seven and it doesn't seem to be taking the charge, I think i let it run down too low. Is it time to get a new one? Have been charging for about 14 hours now but not enough to even turn the engine over. Thanks
-
got my strip led mounted on 2 pipe clips that then just clip onto roll bar, work well with the half hood and can be rotated around the bar to any height, can also be removed without leaving any holes or marks. didn't use the wiring harness, just wired direct to rear light cluster and works great, no issue with mot time
-
Quoting Mankee: Is there a reason for sticking with the Caterham Supersport kit? For legality purposes for example? If not, I'd stick a set of other aftermarket cams in there and maybe standalone management. Here's the K-series EU3 Supersport kit on Caterham Parts: here. that says its for the 1.6 k, is it the same for the 1.4? I also have a 1.4 k on a 54 plate so does anyone know if its eu2 or 3?
-
Sitting in the White Bear in Chelsham(me not the plane), heard and saw it fly over towards Biggin Hill quite low, must be an airshow near-by, was a quite sight and noise was brilliant, it done what seemed to be a few fly passes.
-
considering making one to go in the roll bar out of perspex with vents to allow air to flow through, nice winter project
-
by the way thanks to everyone for there suggestions
-
Good News; finally got round to doing something about the squealing today, i chamfered the pads, cut a groove in them matching the depth of the m1144 racing pads, took the glaze of with some sand paper and applied copper slip (it was all i had to hand) to the rear of the pads and success!!! 😬 I don't know which action cured it but now i can finally stop without sounding like a cat being castrated.
-
saw you again sat afternoon, i was still in the white van. honest. im not a stalker
