Jump to content
Click here if you are having website access problems ×

Superwhite R283

Account Inactive
 View Profile  See their activity

  • Posts

    1,003

  • Joined

  • Last visited

 Content Type 

Everything posted by Superwhite R283

  1. Superwhite R283
    Thanks chaps. Think I may have found a fitting, I'll post on here if it works. Whats Oilys mod, I missed that.
  2. Superwhite R283
    OCD, I think you have me confused with someone else
  3. Superwhite R283
    It is, but if I do that it will hit the air box, so I ideally need the feed to come out at an angle of between 180-270 degrees (based on the current angle being 0 degrees) so it misses the air box, if that makes sense. Or for the feed to come out parallel or just shut up and deal with the loop in the fuel hose
  4. Superwhite R283
    I've installed jenveys and an air box using the original fuel rail. The fuel rail feed hose now has to be installed upside down (to miss the air box). Meaning the hose now loops up and around, I was wondering if anyone had found a feed connector with a different angle allowing the hose to be routed down. Hope the picture helps: here
  5. Superwhite R283
    Just putting my peddle box back together after some powder coating and thought it would be a good time to change to the race version (tried a car and preferred the different feel), CC are out of stock, thought i would ask
  6. Superwhite R283
    Just thought i would ask
  7. Superwhite R283
    Will do
  8. Superwhite R283
    I’ll take it (if it will fit jenveys, even if it needs a new back plate)
  9. Superwhite R283
    Thanks, I will PM you my email. I will keep my eye open. Thanks again.
  10. Superwhite R283
    Hi, thanks for the quick reply, I'm in no rush, before mid April would be ideal. Guess you don’t happen to be going to Bookatrack open day at Donington this Saturday…
  11. Superwhite R283
    Wanted – 1x rear SLR 2 piece split rim (polished outer black centre) as here Any condition
  12. Superwhite R283
    All done and you were both right
  13. Superwhite R283
    Just in case anyone searches for this in the future, it works, close but works and I didnt need to use washers on the engine mount in the end. One new imperial/metric problem is that the J hose from the water pump to the top radiator connection (via the submarine pipe) cant go in the normal location (above the gold pump) as it would hit the duratec metric oil tank, so a little re routing and it works (running beside the oil tank)
  14. Superwhite R283
    clever
  15. Superwhite R283
    I'll have to keep my eye out for a second hand one (very unlikely) A few pitures: here here here
  16. Superwhite R283
    Hi Julian Sorry to hear you're having problems with the install. I've just recently fitted an auto tek air box, EU3 in a metric S3, I didn't have any issues, happy to take any pictures if it would help. I didn't know you could get carbon ones, very nice, I want one :0) Cheers Darren
  17. Superwhite R283
    Interesting read, haven't seen that before, thanks for sharing. Following this with interest
  18. Superwhite R283
    Tempted but (hopefully) mines a few years off a re-pack (only a year old)......umm.......
  19. Superwhite R283
    Wet sump K - same readings :0)
  20. Superwhite R283
    BM sent
  21. Superwhite R283
    Afraid not, its an EU3 wasted spark
  22. Superwhite R283
    BTTT
  23. Superwhite R283
    Thanks for everyone's help, now sorted, bought the duratec tank and it fits
  24. Superwhite R283
    Sold
  25. Superwhite R283
    Now sorted, thanks everyone
×
×
  • Create New...