Mrb00ns

Have you had it set up for you in current form? It might improve things significantly without the spend. I don’t think ride comfort is really a thing in 7s (although I don’t personally mind the ‘connection’ with the road). Car shouldn’t really be skipping unless you are giving it the beans.

Hi, I’m looking to fit one of these on my dry sump 420R (had one on my Sigma and greatly improved warm up time for oil). My last one was fitted by PPE. Does anyone know what type I need for the 420R and is it a simple job to fit? Thanks, Chris

Agreed on location but as the previous post just mentioned I think there is a pre-fitted bund ready for the sensor in the tank, which seems a bit weird.

Is this the drain plug in the tank, or is it the larger one where the finger filter is fitted?

Hi, I’m looking to fit a dual temp/pressure gauge to my dry sump 420R. I know there is an option some folk use with the water temp gauge and a switch, but I prefer this alternative. I understand that there is a pre-drilled space in the dry sump to fit a temp sensor. Is this where most folk choose to fit it (and before I start digging around, where is that located - top or bottom/ near side offside etc). Presumably I need to drain the oil to install? Thanks Chris

Hi, I’ve got a long stem (100mm) SPA centre mirror - flat glass - that is available for sale. Plain black ABS, looking for £80 inc UK shipping. Good condition. Alternatively I would happily swap for a short stem (40mm) version. Thanks, Chris

It should just come off if you tug hard enough 🤭 if not then some mole grips should do the job. Angle grinder sounds extreme. Fitting the new one is the real bugger. There is a lip on the underside of the lever that you need to grind down to get the new cover on.

Hi, I’m taking the leap with TBs for my 420R and wondered if anyone happened to have a carbon airbox that they might be willing to part with for the project. For an S3 so will be poking through the bonnet so nothing too tatty. Have already spoken with Neil (7 Wonders) about the one he has advertised, just seeing what else is out there. Cheers, Chris

Now sold.

I think the hole in the bonnet is inevitable. just as a ballpark, what will the hole in the wallet look like for TBs Inc mapping etc?

With the sad demise of Premier Power, what options are out there for throttle body upgrades for a 420R (and of those, who would anyone recommend)? Cheers Chris

Hi, I’m looking for an indoor ‘stretchy’ type cover for a Caterham S3. Any available before I buy new?

I’ve just had a set delivered and shall be endeavouring to fit them tomorrow (if my hands don’t freeze off doing so). Will report back.

Hi. It won’t hold it in landscape, but should be fine for the 12 mini in portrait. It goes from 75-89mm width.

As per title, 3d printed scuttle mounted phone cradle with universal phone holder. Have now switched to a MagSafe cradle due to upgraded phone. £30 plus £5 postage anywhere in the UK.