TallTim

SOLD!

Picture here

PRG minisporter XW New in 2020 did one academy season, bought by me in 2022 and used for one CSCC season XW model apparently makes loading caged cars easier, as you can still close the lid if slightly off centre. Extras include Wheel chocks High level tyre rack Jerry can storage Winch Locking hitch This trailer is over £7.5k new with a long wait. Trailer available now. Located in Reading. £5250 Please call Tim 07789 221774 for more photos / information

I have this setup on my car... Oil in from the bottom of the tank to the angled connector and oil out to the cooler / top of tank from the straight connector at the front of the sump.

I've got a an unopened 5L bottle you can have for £10 if you're near Reading any time soon. Drop me a message.

A full set of Avon Caterham slick tyres, standard 6” and 8” sizes. Used for testing. Plenty of life left. I’m now running different tyre size on the rear so these are unlikely to get used again. Collection from reading RG4 I will wrap in pairs for postage, but you have to arrange your own courier. please pm me your number or email if you want more info or photos. £200 Thanks Tim

Now sold. Thanks

C2 Blue Single axle Brian James Trailer. 3.20 m x 1.80 m bed. Lock fitted in coupling head. New heavy duty jockey wheel. 5 years old. Located in Reading. Tows great, easy to move about. I push it around a gravel drive on my own. £1495.00 Photos here Photos Please drop me a message and I'll send you my number. Thanks Tim

Thanks Both for the advice, Went out and had a quick check around the car this morning. I have some play in the propshaft and also some in the right hand driveshaft. Made a couple of videos of the issue. I'm assuming that play in both is way too much and should be sorted (the left hand driveshaft has no play that i can feel)? https://youtu.be/KDnMIsYRTyI for the driveshaft https://youtu.be/EeFiUEG6LSw for the propshaft I have a race next weekend, so realistically only the driveshaft could be sorted before then. I need to take the diff out and change the ratio, so i'll do the prop and gearbox seal at the same time. Thanks Tim

Hello all, Found that my gearbox oil seal is leaking. Has anyone managed to replace the seal without removing engine and box? Assuming it can be done in the car, I'm also wondering if I'll have to remove the diff to extract the prop from the gearbox? it's a Sadev gearbox if that makes a difference, but I think they are the same output arrangement as a type 9. Again glad to be corrected if I have made an incorrect assumption. Any help or advice gladly accepted. Also, on a possibly related note, I am chasing down a vibration that occurs at high speed. Over about 110 there is a reasonably strong vibration through the car. I'm going to get all the wheels rebalanced! But the prop oil seal leaking makes me wonder if there is some vibration there that has caused the leak. Any thoughts? Thanks Tim

Hello all, I’m looking for a set of 6” / 8” wheels. 8 spoke or Apollo. If anyone knows of any coming up for sale, please drop me a line. Many Thanks Tim

I’ll take a set, assuming they’ll fit a 2009 SV Thanks

Hello, please can you confirm which grille it is? Or post a photo? https://caterhamparts.co.uk/nose-cones/4727-sv-nosecone-grill-2010.html https://caterhamparts.co.uk/nose-cones/791-mesh-grille-with-7-sv.html I’ll likely take it either way. Thanks Tim

Thanks JV, I’ll have a good go at cleaning up the pin before fitting the new loom. Good find on the connector, thanks. I want a few other bits so will probably go with the pre made loom this time.

https://caterhamparts.co.uk/looms/4586-sub-loom-fuel-pump-sigma-r400-c400.html Looks like the ticket... thanks for your help Jonathan