coffeekid
-
Posts
45 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Blatmaps
Speed Championship Results
News
Website Help
Downloads
Gallery
Store
Everything posted by coffeekid
-
Where are the recommended positions for the pads when lifting an S3 on a 2 post lift?
-
Thanks. Am I right in thinking the car takes 4.5L (it has a wet sump)
-
Thanks - mine just says 'Caterham Approved Oil'
-
About to do an oil change on my 360S - whats the recommended oil to use?
-
I would try sitting in an S3, I think you could be surprised.
-
I had a 997.1 C2S - now have a 981 Boxster in it place and much prefer the drive of the 981
-
Thanks guys
-
2017 and just standard
-
Can anyone send me a link to the correct discs and pads I need for a 360S? thanks
-
Battery providing enough power?
-
slj1 - overall what have you thought of the upgrade? - if you knew then what you know now would you do it again? Seriously considering this myself at present too.
-
I have a 360S - clutch bite point is very high - almost at the limit of travel. Given my limited knowledge I dont know if this is normal or not?
-
Yup. I have one spare - bought one, went to fit it and found there already a connection on my car. Still brand new in the packaging. I'll have a look for it in the garage tomorrow
-
Thanks I see millers now list this as the replacement for the xfs - is this the stuff to go for? https://www.opieoils.co.uk/p-60214-millers-oils-xf-longlife-5w-50-full-synthetic-engine-oil-formerly-xfs.aspx
-
Is there a complete list of parts anywhere that I need in order to do an oil service on my 360S? What oil filter? What oil and amount etc Thanks
-
Haha - absolutely. Ctek conditioner already purchased. Lesson learnt
-
New battery installed, sorted the problem - started first time - thanks to all who helped
-
So.....checked the voltages of the battery 12.42v dropping to 9.1v during cranking
-
Currently on the charger - hopefully that sorts it
-
Car has not been used for about 2 months Just tried to start it but to no avail. Its a 2018 360s When I turn ignition on I can hear fuel pump priming. Press starter button - can hear starter motor etc trying to start but the engine doesnt fire up. Any suggestions? (obviously the best suggestion is drive the car more often) Thank in advance
-
This is the cable I have
-
Simple question guys... I have just bought a CTEK MXS 5.0 to keep the battery charged during times of infrequent use of the car. Going to permanently connect the eyelets so I just need to plug in charger each time. Do I need to attach the negative eyelet to somewhere on the chassis or to the negative pole on the battery? Thanks
-
I’ll take it. Will PM you now
-
Have just double checked - it is actually green and purple so does that mean I don’t need the sub loom I have just ordered
-
Behind drivers side rear arch, where the wires go to the rear light cluster there are 2 connectors hanging. Black wire and green wire. Any idea what they are for?
