Jump to content
Click here if you are having website access problems ×

Nickhughes

Member
 View Profile  See their activity

  • Posts

    14

  • Joined

  • Last visited

 Content Type 

Everything posted by Nickhughes

  1. Nickhughes
    Will order new alternator ( it is 34 years old). Thank you for the help
  2. Nickhughes
    Light now staying on all the time. Votage at rest is 12.70 volts Minimum when cranking is 10.2 At Idle 12.4 at 3000 rpm 14.6 This is from cold engine.
  3. Nickhughes
    My 1988 crossflow engined car has the following problem. Start car and ignition warning light goes out then as revs increase light comes on. Sometimes after driving for a while it starts to, or does go out. Sometimes when indicators are turned on red light flashes also. Alternator is charging. Have recently put rebuilt engine back in car and changed to " Lucas Style Electronic Ignition. " from original Lucas points distributor.
  4. Nickhughes
    Yes Thanks sailed through the MOT with the normal advisory of oil drips from the crossflow. Live near Hazelbury Bryan so would be great to meet up with local 7's.
  5. Nickhughes
    Shakedown run before MOT today. Good to see another seven out and about.
  6. Nickhughes
    just compress the spring but the springs are wound quite tight and the motorcycle one can only compress about six inches of the coil which makes them near enough coil bound and is not compressed enough to get the collar on The garage ones are too big for the coils. ( this is on a 1988 car original type shock and spring ).
  7. Nickhughes
    I have received new shocks and springs from Redline. Managed to fit rear springs onto shocks with motorcycle spring compressor but this will not work on the fronts. Have taken to my friendly garage and motorcycle repair man and neither has tools to fit. Does anybody know if there is anywhere local to Blandford, Dorset who can fit these?
  8. Nickhughes
    You could try HVE Mobile on 01258 459241. He is used by the garages in Blandford to sort out electrical problems, but have to say was not too keen to work on my seven when I had an electrical glitch. Said he had got stuck in one once.
  9. Nickhughes
    My 1988 seven has failed its MOT for the 1st time ever. Oil seal leaking on rear axle (live). Has anybody any tips or diagram as how to remove half shaft and replace seal? Bearings have no play at present. Parts have arrived from Redline including new brake shoes.
  10. Nickhughes

    R747 XXX

    Nickhughes posted a topic in Spotted

    Green and Ali. Driving out of Ringwood very jealous as I was in very hot van.
  11. Nickhughes
    That's great. When would be convenient to pay and pick up. Regards Nick
  12. Nickhughes
    I would like to buy these please. Presume they will fit 1988 long cockipt imperial chassis. Nick
  13. Nickhughes
    There should be bracket on engine block that is bolted to block with 2 bolts. Bottom of Alternator is fixed to this with nut and bolt at front and back. Top of alternator is attached with bracket to water pump adjustable at alternator end. Will send photos when I get home if you want retrobolts.co.uk do packs of nuts and bolts for crossflow engines. I live near Blandford so welcome to meet up sometime.
×
×
  • Create New...