Ngmatthewsme.com
-
Posts
31 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Events
Blatmaps
Speed Championship Results
News
Website Help
Downloads
Gallery
Store
Everything posted by Ngmatthewsme.com
-
Anyone know the standard spec of springs on a 2019 360R?
Ngmatthewsme.com replied to Ngmatthewsme.com's topic in TechTalk
He asked me to confirm which springs were fitted... -
Anyone know the standard spec of springs on a 2019 360R?
Ngmatthewsme.com posted a topic in TechTalk
About to change springs and dampers on my 2019 360R for Nitrons and need to know spec of the springs Caterham fit as standard. Can anyone help? -
New lambda on the down pipe cured it. Caterham were brilliant and posted a replacement part under warranty during lockdown. Thanks guys
-
Is it the R500 decat pipe for a 360R ... Cheers
-
Doesn't seem to do it blipping the throttle, it is very slight but noticeable on the road.
-
I've just bought a 2019 360R from Caterham, 5000 miles on the clock. I will add that I'm in Cornwall so a trip to Crawley is impractical. There is a misfire at 3500-4000 rpm which is a PITA as it's dual carriageway cruising speed. The car starts and runs fine and is great above and below that range. It's not cutting out, just a hesitation. Any suggestions as to where to start looking?
-
Cockpit covers are out of stock @ Soft Bits... is there an alternative for an SV?
-
Is this still available? If so can you mail pics to ngmatthews@me.com please?
-
Er... send it to the purchaser?
-
3 tickets and reserved car parking for Le Mans Classic in July, unfortunately other commitments mean that I have to cancel our trip The 3 sets of tickets include 3 x General Entry 3 x Paddock Access 3 x Grandstand seats (Stand 18) One car park pass (Parking Rouge) These were bought at ACO member rate and so are cheaper than you will find anywhere. Add £2.50 if you want them recorded delivery. They are advertised elsewhere so first come first served... email ngmatthews@me.com
-
Now sold
-
http://i.ebayimg.com/00/s/MTYwMFgxNjAw/z/XnEAAOSwAL9UeFFH/%24_1.JPG Sorry, they are the 4 point Caterham harnesses similar to this but badged as Caterham.
-
Taken off my 2005 S3, I have replaced these with "parachute" style harnesses. They are in black and in perfect order. £50 for the pair?
-
Just taken these off my 2005 S3. They are black and in full working order, I've just replaced them with the smaller units. Being hyper critical there is a hairline crack in one of the lenses but it is hard to see. Make me an offer + carriage?
-
What have you? Must be in excellent condition Thanks Nick
-
Sorry, only just picked up your mail as I have been away. Replied Nick
-
S3 Factory Exhaust System and manifold K series 4-1 collector (inside the body) with cat in excellent condition and from car with only 1k miles. Also includes heat shield. £150 plus postage. I bought my Approved Used car from Caterham in April and they fitted a new exhaust before delivery. The system has done less than 1000 miles (300 of which was driving home after collecting the car!) and so is virtually new. Coming off the car next week Located in Cornwall
-
Now sorted Thanks
-
Cheers Nick
-
Thanks guys, SPA mirrors to be confined to a box and then ebay... ordered replacements from Car Builder Solutions as recommended above
-
No key for the fuel cap? Looks like the same colour as my car too
-
Thanks but as previous owner had left two rivet filled holes on the corners of the scuttle I've mounted the mirrors there. It seems that I have to be a lot more brutal with the allen key (as advised by SPA and Caterham ) I might add a drop or two of loctite for good measure.
-
I have just fitted an aeroscreen and the SPA Formula mirrors that came with it. I fitted them to the bodywork as I had two predrilled holes from the previous owner but are they always such a PITA to get them set? The fitting in the base to tighten the lower ball joint looks like an allen key but nothing fits it and so we could only tighten with a flat screw driver. Within a few miles the pesky things just vibrate loose and we have to remove and retighten! There are no instructions with them so, before resorting to something akin to superglue, is there something I am missing? I can't be the only one with this problem surely? Cheers Nick
-
Thanks... yes, a Bond fan and a bean counter by profession! Nick
-
Wanted an upgrade to the standard exhaust on my 1.6k. I'm changing the cams to 633/285s with Verniers and an emerald also looking for 421 manifold Thanks
