Jump to content
Click here if you are having website access problems ×

Steve_K

Member
  • Posts

    144
  • Joined

  • Last visited

Reputation

0 Neutral
  1. There's a film on YouTube showing the 7 manufacturing process which shows them sanding this joint flat after welding. No filler in sight. Steve
  2. Steve_K

    O ring dilema

    that doesn't work, try https://www.screwfix.com/p/arctic-products-metric-o-ring-selection-box-225-pcs/4312j?_requestid=402176
  3. Steve_K

    Sat nav

    I use a Garmin Zumo bike satnav and, while they are more expensive, they have bluetooth built in and are pretty waterproof. The bluetooth can be linked to your phone but if you have an intercom with a bluetooth dongle, its a bit of a faff to set up. I only got it all working once and couldn't be bothered since. Steve
  4. Just as an experiment I posted the original text into an Add New Comment box to see if things changed... When I posted a new topic (https://www.lotus7.club/forum/chitchat/aly-caterham) There was no format options box on top of the Body box. Clicking on the Text format options at the bottom just takes you to the top of the page. Carriage return didn't break the text. It also happened when I created this post. My first post was made using Chrome Version 64.0.3282.119 running on Linux Mint 18.3 (64-bit). This post was made using Firefox Quantum V58.0 (64 bit) also on Mint. Steve
  5. When I posted a new topic (https://www.lotus7.club/forum/chitchat/aly-caterham) There was no format options box on top of the Body box. Clicking on the Text format options at the bottom just takes you to the top of the page. Carriage return didn't break the text. It also happened when I created this post. My first post was made using Chrome Version 64.0.3282.119 running on Linux Mint 18.3 (64-bit). This post was made using Firefox Quantum V58.0 (64 bit) also on Mint. Steve
  6. The linked advert calls this a 'circuit breaker'. I'm aware that some circuit breakers are designed against a duty cycle which only involves its protection function. While they can be used as switches for security purposes, if they aren't designed for it, they might exhibit a shorter useful life. I don't think this is a safety issue so you pays your money and takes your choice... Steve
  7. Its probably not a dedicated 'running in' oil. ISTR my RS175 Duratec was delivered with mineral oil (grade unknown) for running in. CC's instruction was to fill with 5W/50 fully synthetic after running in for between 500 and 1000 miles. As it happens I left it in until about 2000 miles as it seemed to be running OK. Steve
  8. I've just done some checking on Google. While the 2.3 Duratec seems to have balancers, it looks like the 2.0 doesn't although I didn't find anything definitive, just an absence of info. Sorry. Steve
  9. This may be a red herring but doesn't the Duratec use internal balance shafts to counteract the 4 cylinder engine's intrinsic secondary out of balance forces? The shafts run at double crankshaft speed which might explain the highish frequency observed. Maybe the engine was supplied with the timing for the shafts out of kilter? Steve
  10. I know nothing about K series engines but could oil be leaking into the cylinders down the valve stems? As long as the leak was small but continuous, it would be almost invisible. Steve
  11. In engineering terms JK has it right. The compression ratio is a key term in determining thermodynamic efficiency of an engine. The higher the ratio, the higher the energy available to do work. The problem with high ratios is the tendency for the fuel/air mixture to detonate, i.e. explode (and in relative terms it is an explosion rather than the usual 'burn') before the spark is passed. To counter this detonation the higher octane fuels are actually harder to ignite by compression. Note that the amount of chemical energy available from the various octanes is more or less the same in engineering terms. Steve PS FWIW the theoretical relationship for the thermodynamic efficiency is given by (1-1/R)^(Ɣ-1) where R is the compression ratio and Ɣ is the ratio of specific heats or Poisson constant. I think this is right but its been a long time since this came up last. Don't bother working it out for your own engines as the real world is a lot more complicated than the theory implies - gamma isn't constant. BTW Petrol's star rating relates to the delay period between the spark discharge and the start of the pressure rise. More stars, lower delay period.
  12. XRX627H nice classic green and yellow. Nice to see. Steve
×
×
  • Create New...