Dorset7

BTTT

Daz,

I've seen them mounted forward of the gear stick on the passenger side of the  transmission tunnel.

The particular car I'm thinking of had it forward of the brake bias valve that was fitted.

When I fitted new front wishbones on my car (narrow track) these are the replacement nuts sent to me by CC, having fitted them I've had no issues and they torqued up correctly?

Could these now be the norm?

As per the title - I'm looking for a standard Sigma silencer if anyone has one?

Cheers

Christian.

Did you manage to retain your old chassis number okay?

Did the light arrive okay?

Email sent. 

PM me your address and I'll chuck it in the post - I don't need it and it'll cost pennies to post. 

If you're not sorted I've a fog light kicking around the garage - let me know if you still need it.

Still looking if anybody has one.

With the front of the car jacked as high as you can and when you think you've filled the system and you have the coolant at the full level on the expansion tank, seal your lips around the neck of the tank and blow (as if blowing up a ballon) this forces the coolant through the system and, daft as it sounds, actually works.

It's the method that was employed at the factory when filling - just remember to blow not suck!

5x Anthracite 13" Wheel Centre Caps with badges. 

All in very good condition. 

£10 + Postage. 

You should be looking at around 1 Bar @ 800RPM (80 degrees C) and 2.5 Bar @ 2000RPM (80 Degrees C)

The pressure relief valve operates at 5 Bar.

Four Avon CR500's 175/55 R13.

Pretty much brand new (4mm - 4.5mm min on all) £150

Collection from Dorset or courier at buyers expense.

I'm after a set of black Mini Light Style alloys. 

Staggered 6x13 & 8x13/7x13

Or

7x13 all round. 

Ford 4x108 PCD.

Thanks.

Brand new and taking up space in my toolbox. 

£10 + postage. 

Upper and lower wishbones from a 2010 metric S3. 

Perfectly straight but showing some chips in the paint. 

I only removed these from my car because I was gifted a new complete set. 

Will require the thin bush in the lower wishbone to fit. 

£100 + postage or can be collected from Dorset. 

Brilliant!!

I'm glad it went to such a good home!

That's my old car, bought by Dave Hardcastle a little while back after I traded it in with S&C, glad to see he's out enjoying it! 

Hi,

4x108 (Ford fitment)

If you fire me your email I'll send some snaps.

Regards

Christian. 

Still got 'em!

Andy, if you PM me your email address I'll send some to you. 

REDUCED TO £300.