gavinp Posted June 27, 2004 Share Posted June 27, 2004 Is this easy to do without causing airlocks? Superlight R #41 Link to comment Share on other sites More sharing options...
Myles Posted June 27, 2004 Share Posted June 27, 2004 I can't see why not on a std. CC ali rad - dunno about the 'orrible black steel jobbie though. The thermostat (fan control) on the ali rad is just below the bleed-screw location - so is highly unlikely to add air that cannot subsequently (easily) be bled-out. YMMV if you've got a different rad though.... Keep BC free and open for ALL. Membership No. 43xx Alcester Racing 7's Equipe - 🙆🏻™ Alcester-Racing-Sevens.com Link to comment Share on other sites More sharing options...
Steve-B Posted June 27, 2004 Share Posted June 27, 2004 have the replacement ready, so if you're REALLY worried, put your finger over the hole until you put the new one in. Steve B Big Black Beast^3 Lighten up everybody....NOW USA 2005: How the West Was Driven Link to comment Share on other sites More sharing options...
Mark Durrant Posted June 27, 2004 Share Posted June 27, 2004 And jack the car up at the front as high as possible before you start Mark D Su77on Se7ens Link to comment Share on other sites More sharing options...
Tony Whitley Posted June 27, 2004 Share Posted June 27, 2004 ...and fit a bleed tee M1 7 SMW 1.4-now-1.8K Mem.No. 10376 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now