Julian H Posted April 21 Share Posted April 21 Hi I am fitting a WOSP LMS430 to my K series. I needed to rotate the plate so the solenoid was underneath the motor unit. When its in it’s ideal? location at the bottom it obscures the lowest fixing bolt. Do i need to replace with a stud and nut to keep the solenoid away from my (VHPD) primaries or should I rotate it a lot closer to them to have easy access for the standard bolt which doesn’t feel quite right to me? Thx Julian Link to comment Share on other sites More sharing options...
Jonathan Kay Posted April 21 Share Posted April 21 Please could you add some photos of it held in position. Jonathan Link to comment Share on other sites More sharing options...
Leadership Team SLR No.77 Posted April 21 Leadership Team Share Posted April 21 Julian, this is how mine looked when I fitted it, before installing the primaries, viewed from above. I don’t recall there being any issue using the original 2 bolts and stud. Stu. Link to comment Share on other sites More sharing options...
Julian H Posted April 22 Author Share Posted April 22 Hi JK, mine looks exactly as Stus picture except I have bolts which have a larger head with Allen key at the end and a stud nearest the engine at the top. I think I will replace the bolts/stud and install as Stu!s photo which is much neater. Thankyou Stu, very helpful photo. Cheers, Julian Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now