Gavsy62 Posted June 29, 2022 Share Posted June 29, 2022 Is there a designated position to fit wing mirrors to the doors? do you just drill and self tap? thanks Link to comment Share on other sites More sharing options...
Area Representative paul richards Posted June 29, 2022 Area Representative Share Posted June 29, 2022 If I recall correctly there are a couple of holes in the metal strip inside the door to fit the standard mirrors. You just have to feel for the holes and put holes in the vinyl. Use nut and bolt to secure. Small plastic caps over the nuts inside the cockpit for IVA (or neatness). Link to comment Share on other sites More sharing options...
Gavsy62 Posted July 1, 2022 Author Share Posted July 1, 2022 Can't find any "holes"perhaps the doors have been updated? Link to comment Share on other sites More sharing options...
ACaterhamCalledFern Posted July 1, 2022 Share Posted July 1, 2022 I wouldn't drill them I would use eccles mounts. There is a post on blat chat about aluminium mounts. So much better than the standard mirrors and you don't need to drill the holes then. The standard mirrors are pants. Link to comment Share on other sites More sharing options...
Area Representative paul richards Posted July 1, 2022 Area Representative Share Posted July 1, 2022 Doors may have been updated. It's 22 years since I built my 7. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now