CheshireCat Posted April 15, 2022 Share Posted April 15, 2022 Had a search but can't find anything. Is there a step by step guide to changing the head gasket on a K series ? Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted April 15, 2022 Member Share Posted April 15, 2022 Private Message sent.Jonathan Link to comment Share on other sites More sharing options...
revilla Posted April 15, 2022 Share Posted April 15, 2022 Unfortunately one of the most important things to do when changing a K Series head gasket is to work out WHY it failed.It could be just a single gasket failure, but there's often an underlying cause (softened head, porosity of the head, low liners, uneven liner heights etc.) and spotting some of these tends to be a matter of experience rather than something it's easy to write a simple step-by-step guide for.If you just replace the gasket and don't identify and remedy the cause, you'll be back here again in no time.Drop me a PM if you want to chat about it. Link to comment Share on other sites More sharing options...
David Brown Posted April 16, 2022 Share Posted April 16, 2022 A lot of very useful info on DVA site. Link to comment Share on other sites More sharing options...
CheshireCat Posted April 16, 2022 Author Share Posted April 16, 2022 Thanks Andrew, sent you a PM. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now