DanRo Posted August 17, 2021 Share Posted August 17, 2021 I read about the idea of the plumbing pipe and found some which fitted inside the throttle pedal. The lateral positioning was better but as referenced above, it still came up too high relative to the brake, so H&T was still an awkward affair. This was my solution, complete with cable tie and beech insert! Like Jonathan, initially temporary, but it never got upgraded and still works a treat. Because the point of contact with the throttle contact is down near the bottom of the wedge, it is lower relative to the brake pedal so the action is much easier now. Link to comment Share on other sites More sharing options...
Benton Posted August 18, 2021 Share Posted August 18, 2021 In my old car used a cut down portion of a cheap screwdriver handle epoxied into the throttle pedal "hole". Lasted no problem for ove4 16,000 miles. Link to comment Share on other sites More sharing options...
graearea Posted April 21, 2022 Share Posted April 21, 2022 3d printed pedal extensions Link to comment Share on other sites More sharing options...
grumpy the 7th Posted April 21, 2022 Share Posted April 21, 2022 So many solutions to one problem Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now