HendrixsWhiteStratReturns Posted July 16, 2021 Share Posted July 16, 2021 Evening allWired in a 12v socket a couple of years ago( to charge phone) and works fine but have recently rigged up two 12v fans in car and they plug straight into one of these ( see pic) which then goes into the 12v. The in-line fuse for the 12v socket is 25amp but blows almost immediately.Know next to nothing about electrics but what would be the correct fuse to fit (and the max that would be prudent to fit) ? Any advice appreciated ! Thanks Link to comment Share on other sites More sharing options...
OldAndrewE Posted July 16, 2021 Share Posted July 16, 2021 Do you know what current the fans are supposed to draw (what power are they)? You have potential for a max of 300W although you do not want to run to the max of the fuse for long. It actually sounds to me as if there is a fault somewhere. Link to comment Share on other sites More sharing options...
Wrightpayne Posted July 16, 2021 Share Posted July 16, 2021 Have you tested your new extra equipment in the tintop (check where the 12v socket fuse is located first!) Link to comment Share on other sites More sharing options...
HendrixsWhiteStratReturns Posted July 16, 2021 Author Share Posted July 16, 2021 Thanks both will look up ! WP - yes and they were fine. Think it might be a duff socket so testing a spare on the morning. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now