Help identifying exhaust please

[Rich Goddard]

Hi

I'm hoping someone can help me identify the make / type of exhaust on my 1.6K S/S?

Unable to find any images exactly like it on the interwebs.

Thanks, Rich

/sites/default/files/images/users/50443/ex1.jpg

/sites/default/files/images/users/50443/ex2.jpg

/sites/default/files/images/users/50443/ex3.jpg

/sites/default/files/images/users/50443/ex4.jpg

[K7 VCT]

Looks like a modified version, using original 4 header pipes and what looks like a non caterham mid section and silencer

 

The factory k series exhausts look quite different

[Wrightpayne]

I thought the primaries looked like R3/4/500 K series. The rest is like nothing else I've seen!

[dodgedavidson]

There are loads of exhaust manufacturers, weird 4-1 collector connection though with that bolt on flange, maybe for a swappable cat section? Any shots of the primaries under the bonnet?

What is it you need to do, repack the silencer? 

Any paperwork from the previous owner?

I would say the welding's not as good as on my Powerspeed :-)

Cheers,

Roger

[SM25T]

Never seen a bolted flange joint before !

[Rich Goddard]

Thanks for the replies everyone.

Roger,  I've stuck in photos of the primaries below - does this help ID'ing the system?   

Yes, I did wonder whether the bolted flange had been done to allow a cat section to be swapped in.   I have paperwork from previous owners, but not related to the exhaust.

Cheers, Rich

/sites/default/files/images/users/50443/primaries%202.jpg

/sites/default/files/images/users/50443/prim%202%20rot%20in%20phone.jpg

/sites/default/files/images/users/50443/prim%201%20rot%20in%20phone.jpg