Barry Thompson Posted October 5, 2020 Share Posted October 5, 2020 My new ctec power to go intelligent charger needs to be set on type of battery. It says set either NORMAL. or. AGM. As I have a sealed powervamp battery just rang them up and they weren't much help and VERY vague but thought AGM. As going to be on crossflow all winter anyone know for sure. 2014 battery says powervamp racing 25 full plate. It's 7 x 7 inches and 3 inch fat. 680 amp cranking and 18 AH which all means nothing to me. My old motorbike one used for years only had one setting Also I want to use it on 2 modern Jap motorbikes with small 12 v batteries and again don't know the setting I should use normal or AGM. Ctec seem impossible to ask GOOGLE talks about limited electrolyte absorbed in a plate separator. ! . Thanks for any help Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted October 5, 2020 Member Share Posted October 5, 2020 Private Message sent. Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted October 5, 2020 Member Share Posted October 5, 2020 Duplicate. Link to comment Share on other sites More sharing options...
Barry Thompson Posted October 5, 2020 Author Share Posted October 5, 2020 Sorted thanks to Jonathan. It's an AGM battery. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now