Powervamp battery on new ctec charger. Confused

[Barry Thompson]

My new ctec power to go intelligent charger needs to be set on type of battery.  It says set either NORMAL.  or.  AGM.  As I have a sealed powervamp battery just rang them up and they weren't much help and VERY  vague but thought AGM.   As going to be on crossflow all winter anyone know for sure.   2014 battery says powervamp racing 25  full  plate.   It's 7 x 7 inches and 3 inch fat. 680 amp cranking and 18 AH which all means nothing to me.   My old motorbike one used for years only had one setting      Also I want to use it on 2 modern Jap motorbikes with small 12 v batteries and again don't know the setting I should use normal or AGM.      Ctec seem impossible to ask  GOOGLE  talks about limited electrolyte absorbed in a plate separator.  ! . Thanks for any help 

[Jonathan Kay]

Private Message sent.

[Jonathan Kay]

Duplicate.

[Barry Thompson]

Sorted thanks to Jonathan.  It's an AGM battery.