Brake System Split

[OldAndrewE]

As part of my refurb I have had to get a new brake master cylinder.  The old one was the Lockheed (ex Vauxhall?) one.  This had 3 connections, one to the rear and one to each of the front.  The new AP standard Caterham one only has 2 connections.  Can someone let me know how the system is usually plumbed with this one.  The simplest way would be to split it front to rear with the alternative of a diagonal split but that is much more complicated to pipe.  Assembly guides are no use as this is all done by Caterham

[elie boone]

On the front vertical tube that holds the top link suspension there is a T piece on later S3 chassis. You can basically place the T where you want at the front as making new brake lines is very simple.

[OldAndrewE]

Thanks Elie