Ian28 Posted November 27, 2019 Share Posted November 27, 2019 Anyone tried fitting new decals with the exhaust can in place? Car is a sigma SV so access to near side is straight forward. Is it possible to fit the offside without removing the standard exhaust? Top tips and suggestions welcome Link to comment Share on other sites More sharing options...
356DNA Posted November 27, 2019 Share Posted November 27, 2019 I just did mine (duratec) and concluded the only sensible way was to remove the exhaust from the collector back. It was tricky enough lining everything up and measuring spacing without the can and cat in the way. Link to comment Share on other sites More sharing options...
356DNA Posted November 27, 2019 Share Posted November 27, 2019 Sorry. Feel such a Luddite but I can’t rotate this image from my phone... Link to comment Share on other sites More sharing options...
Member Jonathan Kay Posted November 27, 2019 Member Share Posted November 27, 2019 It's not you.Jonathan Link to comment Share on other sites More sharing options...
pugwash Posted November 29, 2019 Share Posted November 29, 2019 It's only one bolt and one clamp to remove the silencer so would make sense to do that. Plus two springs if you want the collector / cat off. Oh and unplug the lambda sensor cable. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now