Sooty Posted August 27, 2019 Share Posted August 27, 2019 Is this any good? http://gunson.co.uk/product/77141 Link to comment Share on other sites More sharing options...
Paul Deslandes Posted August 27, 2019 Share Posted August 27, 2019 I made my camber gauge with a bit of aluminium angle and a dual axis spirit level. I'm sure you could adapt the idea to measure caster as well.See here for full description and pictures, 3rd page. A lot cheaper............Paul Link to comment Share on other sites More sharing options...
Jonathan Kay Posted August 27, 2019 Share Posted August 27, 2019 PaulI needed a small "spirit level" at the weekend and was playing with a newer-than-mine iPhone. I've had apps that did this before but the new built-in Measure was very neat with a digital inclinometer.How much would that simplify what you did in 2005?ThanksJonathanPS: Measure also measures things at a distance. Link to comment Share on other sites More sharing options...
Jim 123 Posted August 27, 2019 Share Posted August 27, 2019 I made a steel bracket similar to that which Paul describes in #2. For measurement setting I then bought a digital inclinometer with a flat magnetic base on Ebay for a tenner which is surprisingly accurate and repeatability is good. It is a piece of cake to calibrate to true vertical before you start by using a good old plumb line. Link to comment Share on other sites More sharing options...
Jonathan Kay Posted August 27, 2019 Share Posted August 27, 2019 Ah... I didn't know that you could get them that cheap.Jonathan Link to comment Share on other sites More sharing options...
Jim 123 Posted August 27, 2019 Share Posted August 27, 2019 This is the type of thing Jonathan:https://www.ebay.co.uk/c/25028360062?iid=254051240348 Link to comment Share on other sites More sharing options...
Jonathan Kay Posted August 27, 2019 Share Posted August 27, 2019 ThanksJonathanPS: Reminds me of American Hot Rod and Project Binky. :-) Link to comment Share on other sites More sharing options...
Paul Deslandes Posted August 27, 2019 Share Posted August 27, 2019 I reckon Jim's version would be easier to use than mine, especially as the inclinometer would 'stick' to the steel angle, and less than a tenth of the cost of the Gunson device.Paul Link to comment Share on other sites More sharing options...
Jonathan Kay Posted August 28, 2019 Share Posted August 28, 2019 Thanks, Paul.Jonathan Link to comment Share on other sites More sharing options...
November7 Posted August 28, 2019 Share Posted August 28, 2019 Yes, you could use MultiClinometer, a mobile phone app which is simple and appears to be accurate. I use it for aligning telescopes. PGM adjusted my camber/castor settings when replacing a steering rack boot. The improvement in handling was immediately evident. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now