Jochen Posted March 16, 2019 Share Posted March 16, 2019 To realize a new project over the next few years i am looking for some parts. Preferably used or affordable new. GRP nose cone with air ducts at top and below. Condition and color doesn’t matter.Quaife LSD and cover for 7 inch Ford Sierra diff Caterham Aero fuel cap black Jenvey dth Duratec 48mm throttle bodies with 90mm trumpets, linkage and bracketRaceline or Caterham dry sump system with internal pumpCaterham / Brise / Pace Duratec triangular dry sump tankDuratec clutch coverdone Caterham / Raceline Duratec oil filter housingGearknob 5 speed black Duratec head Raceco silencerRaceline Duratec-R cam coverAnd last but not least i am searching for an S3 donor car. Maybe a total loss (race ?) car with damaged engine, accident or best both. Duratec prefered.Kind regards from Germany,Jochen Link to comment Share on other sites More sharing options...
Andy Doughty Posted March 20, 2019 Share Posted March 20, 2019 Hi JochenI have a couple of the older spec Duratec heads, one of which suffered a bit of valve clash! They both probably need new guides and a refresh before use.I also have one of the original Ford alloy cam covers which has been crinkle painted.also an engine with crank and all parts but dismantled although it has a mark on one of the bores where water got into one of the bores and caused a bit of surface damage. I think it would rebore OK.if you are interested I can get them out of storage and send you pictures.CheersAndy Doughty Link to comment Share on other sites More sharing options...
garybee Posted March 20, 2019 Share Posted March 20, 2019 I have a spare Caterham Duratec lightweight flywheel if you're interested. Link to comment Share on other sites More sharing options...
Jochen Posted March 27, 2019 Author Share Posted March 27, 2019 Hi Andy, i‘m afraid the orign cam cover is too high to use it with a 2.3 or 2.5 Block. Even a 2.0 engine is not useable.Maybe i get in touch with you if I find no undamaged later spec head.Best regards,Jochen Link to comment Share on other sites More sharing options...
Jochen Posted May 29, 2019 Author Share Posted May 29, 2019 Hello Gary,i have a Cosworth aluminium flywheel with 230mm friction face diameter. Only need an matching spring loaded cerametallic paddle clutch plate for it. Link to comment Share on other sites More sharing options...
vander Posted June 2, 2019 Share Posted June 2, 2019 Hi Jochem,I haver a 2.0 duratec decat pipe and R500 silencer lying around if you are interested. PM me if you are interested. Best,Andrew Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now