mrts Posted February 10, 2019 Share Posted February 10, 2019 Hi. New 7 owner (2008 SV), first time poster. With the original Momo steering wheel, the 3 bolts point up/12 o´clock. Got a new Sparco, which is drilled pointing to 6 o´clock/down. Can anyone tell me if there´s an easy fix to have the ´fat´ spline (13 spline) pointing down to match the Sparco? Link to comment Share on other sites More sharing options...
Leadership Team SLR No.77 Posted February 10, 2019 Leadership Team Share Posted February 10, 2019 IIRC, you can disconnect the lower steering column from the universal joint where it connects to the rack and rotate it by 180 degrees.Stu. Link to comment Share on other sites More sharing options...
Area Representative paul richards Posted February 11, 2019 Area Representative Share Posted February 11, 2019 As Stu says. Disconnect universal joint (either from rack or steering column) and rotate 180 degrees. Make sure bolt goes back in the groove when you reconnect. Link to comment Share on other sites More sharing options...
mrts Posted February 11, 2019 Author Share Posted February 11, 2019 Thanks guys, changed over and the right way up now :) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now